as i've just had a new exhaust made for mine, i'm selling my old exhaust

it's a magnex, with 2" bore, lambda boss ready

it's had a few reapirs as you can see, the 2 square welds are on the bottom, where the previous ownermust have bee touching the road/speed bumps

looks for around £130 for it

are various track days with non SC setup it was between 89-95Db so perfect for track days

here are a few pics

just as a note, my enginer sit's at standard angle and the bulkhead modified, so may need a little alteration before fitting all 205's with a gti6 engine

click to make them bigger

________________________________________

Do you need a 205 > 306 gti6 plug and go engine loom? PM ME

TORQUES for all your braided fuel line needs

MY YouTube Videos'

SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP

268+BHP and 860kg = FUN

Is the manifold you're using stock too? I run a modified bulkhead and stock manifold is all, just wondering if it would just bolt on...