i just bought a full exhast system with downpipe off a 306 2.0 Rallye..to put on my s16
should be just an easy fit ... yes? i hope
thanks
|
displaying posts 1 to 6 of 6
Author | Subject: Rallye & S16 downpipe |
marcello
Junior User Location: Sydney Registered: 23 Jun 2011 Posts: 61 Status: Offline |
Post #1
Hi friendsi just bought a full exhast system with downpipe off a 306 2.0 Rallye..to put on my s16 should be just an easy fit ... yes? i hope thanks |
Posted 31st Oct 2011 at 09:46
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,838 Status: Offline |
Post #2
nope!the exhaust will fit if it fits onto a standard system, but the downpipe wont. ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
Posted 31st Oct 2011 at 11:00
|
marcello
Junior User Location: Sydney Registered: 23 Jun 2011 Posts: 61 Status: Offline |
Post #3
why whats the problem with the downpipe shorter? longer? |
Posted 31st Oct 2011 at 11:20
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,838 Status: Offline |
Post #4
quite a bit shorter and a different angle due to the large 4 branch manifold the RS engine has.________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
Posted 31st Oct 2011 at 12:07
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,796 Status: Offline |
Post #5
angle and the fitment inside i think, the little flap bit at the joint________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
Posted 31st Oct 2011 at 12:14
|
dragoon
Seasoned Pro Location: Ghent - Belgium Registered: 30 Dec 2008 Posts: 1,071 Status: Offline |
Post #6
s16 downpipe is same as the xsi/xs (1.8/2.0)won't fit a 6 ________________________________________ Team WheelwhoreTeam Limited Edition Astor 306 Francorchamps RIP Virtual Blue 208 GTi quote: I this place. So many illiterate deluded fool's acting 'ard . . . and so many literate intelligent people to rip them apart and knock them back down again . . . ahh |
Posted 1st Nov 2011 at 01:12
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.