Post #1
had a accident in my 6, think i have bent the front subframe. are all 306 ones the same or are the gti6 ones specific ? any advice would be appreciated.
|
displaying posts 1 to 5 of 5
| Author | Subject: front crossmember |
 daij1380
Newbie  Location: neath Registered: 22 May 2010 Posts: 29 Status: Offline |
|
 Posted 10th Aug 2011 at 02:28
|
|
|
atterz
Seasoned Pro  Location: Stafford Registered: 18 Feb 2011 Posts: 1,134 Status: Offline |
Post #2
Same mate. ________________________________________ owain wrote: A GTI-6 with a good dashboard and the seats down can outsprint an E46 M3 in July. |
|
Posted 10th Aug 2011 at 19:45
|
|
|
adam b
Seasoned Pro  Location: The Nam Registered: 24 Jan 2006 Posts: 12,828 Status: Offline |
Post #3
The cross member is welded on under the rad, the subframe is XU engine specific. Two different things...________________________________________ Nothing to see here |
|
Posted 11th Aug 2011 at 02:40
|
|
|
velar
Regular  Location: swindon Registered: 04 Jan 2009 Posts: 448 Status: Offline |
Post #4
the mount for the gear linkage is slightly offset on the XU engined cars( to miss the exhaust I think)________________________________________ L reg "black and blue" phase 1 track 6 |
|
Posted 11th Aug 2011 at 04:00
|
|
|
daij1380
Newbie Location: neath Registered: 22 May 2010 Posts: 29 Status: Offline |
Post #5
thanks for info. Now on the look out for a subframe. |
|
Posted 11th Aug 2011 at 13:27
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2025 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.