Mount cradle cracked
jimmy_boy has attached the following image:
________________________________________
GTI-6 & RallyeRallye gets sideways in the wet at Snetterton

![]() ![]() ![]() ![]() ![]() |
displaying posts 1 to 13 of 13
Author | Subject: Engine Mount Repair Photo's |
![]() Senior User ![]() Location: Christchurch Registered: 09 Jun 2003 Posts: 14,752 Status: Offline |
Post #1
As requested ...Mount cradle cracked jimmy_boy has attached the following image: ________________________________________ GTI-6 & RallyeRallye gets sideways in the wet at Snetterton ![]() |
![]() |
![]() Senior User ![]() Location: Christchurch Registered: 09 Jun 2003 Posts: 14,752 Status: Offline |
Post #2
Drilling out the hole - mind those aircon pipes!jimmy_boy has attached the following image: ________________________________________ GTI-6 & RallyeRallye gets sideways in the wet at Snetterton ![]() |
![]() |
![]() Senior User ![]() Location: Christchurch Registered: 09 Jun 2003 Posts: 14,752 Status: Offline |
Post #3
Made up plate with captive nut welded to the undersidejimmy_boy has attached the following image: ________________________________________ GTI-6 & RallyeRallye gets sideways in the wet at Snetterton ![]() |
![]() |
![]() Senior User ![]() Location: Christchurch Registered: 09 Jun 2003 Posts: 14,752 Status: Offline |
Post #4
Shaping it into positionjimmy_boy has attached the following image: ________________________________________ GTI-6 & RallyeRallye gets sideways in the wet at Snetterton ![]() |
![]() |
![]() Senior User ![]() Location: Christchurch Registered: 09 Jun 2003 Posts: 14,752 Status: Offline |
Post #5
Welded in pre-cleanupjimmy_boy has attached the following image: ________________________________________ GTI-6 & RallyeRallye gets sideways in the wet at Snetterton ![]() |
![]() |
![]() Senior User ![]() Location: Christchurch Registered: 09 Jun 2003 Posts: 14,752 Status: Offline |
Post #6
Ready for rubber mount to be screwed back into positionjimmy_boy has attached the following image: ________________________________________ GTI-6 & RallyeRallye gets sideways in the wet at Snetterton ![]() |
![]() |
![]() Club Snapper ![]() Location: Midlands Registered: 22 Mar 2004 Posts: 5,183 Status: Offline |
Post #7
nice to see a quality job done |
![]() |
![]() ![]() Location: Nowhere near banner Registered: 11 Dec 2002 Posts: 25,602 Status: Offline |
Post #8
Sweet job dude ![]() ![]() |
![]() |
![]() Senior User ![]() Location: Manchester Registered: 06 Jun 2004 Posts: 615 Status: Offline |
|
![]() |
![]() Senior User ![]() Location: Christchurch Registered: 09 Jun 2003 Posts: 14,752 Status: Offline |
Post #10
![]() ________________________________________ GTI-6 & RallyeRallye gets sideways in the wet at Snetterton ![]() |
![]() |
![]() Senior User ![]() Location: Manchester Registered: 06 Jun 2004 Posts: 615 Status: Offline |
|
![]() |
![]() ![]() Location: Nowhere near banner Registered: 11 Dec 2002 Posts: 25,602 Status: Offline |
Post #12
Why pug!!use a local garage ![]() |
![]() |
![]() ![]() Location: Nowhere near banner Registered: 11 Dec 2002 Posts: 25,602 Status: Offline |
Post #13
This is a common problem for higher powered 306'sThe bodywork just wasn't made strong enough for the beastly engine ![]() Here's a more extreme case ![]() dommorton has attached the following image: |
![]() |
This thread has been locked
The Peugeot GTi-6 & Rallye Owners Club - ©2025 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.