|
displaying posts 1 to 25 of 50
Pages (2): [1] 2
| Author | Subject: Rear Boot Badge |
 hudson603
Senior User  Location: Burgess Hill Registered: 29 May 2005 Posts: 988 Status: Offline |
Post #1
I've had a search but couldnt find anything, is it possible to order just the bit pictured below from peugeot? I cant be arsed with the ball ache of removing the whole Assy as thats all ok, so thought if I could just stick a new badge on it, that would do the trick. Thanks  |
 Posted 22nd Oct 2010 at 19:58
|
|
|
craigy_87
Seasoned Pro  Location: wishaw Registered: 06 Jan 2008 Posts: 1,325 Status: Offline |
Post #2
 got this up on service box would it be part number 9 on the diagram? if so it comes up roughly about £27 and £28 for the two different part numbers |
|
Posted 23rd Oct 2010 at 07:11
|
|
|
hudson603
Senior User Location: Burgess Hill Registered: 29 May 2005 Posts: 988 Status: Offline |
Post #3
Looks like that's the whole Assy which is a bit of a pain, might try to make a replacement if I can't get the badge bit on it's own... Or maybe I'll stroll round the scrappy tomorrow to try my luck!Thanks for checking it out Craig |
|
Posted 23rd Oct 2010 at 15:08
|
|
|
mabgti
NV motors  Location: Bham tunnel @7400rpm Registered: 28 Aug 2003 Posts: 9,127 Status: Offline |
Post #4
9 is what you want... but its about £30 iirc.________________________________________ Team Supercharged Gti-6NV Motorsport Automotive Performance Tuning 0121 448 7515 ECU Remapping/ DPF removal VAG/BMW Diag and Option Coding Peugeot Planet ECU coding/transponder programming etc www.nvmotorsport.com Facebook Page Project S6 |
|
Posted 23rd Oct 2010 at 22:24
|
|
|
astormatt
Regular  Location: malvern, worcs Registered: 03 Nov 2008 Posts: 228 Status: Offline |
Post #5
Can you still get this version of the badge? Bit of a random question but i ordered one from Pug (£23+vat) and even though i gave my reg number over it came back with a badge where the lion is flush (8726H3) not sticking out like the above! Didnt notice until i put it on that it was different  A tip is to remove the wiper motor as i struggled with it in place, hence why i didnt take it back! ________________________________________ |
|
Posted 24th Oct 2010 at 01:46
|
|
|
hudson603
Senior User Location: Burgess Hill Registered: 29 May 2005 Posts: 988 Status: Offline |
Post #6
I dont need to replace the whole thing which is annoying which is why I'm now trying to think of other things I could do for it, unfortunately experimenting with the badge I've taken off and a touch up set hasn't gone well and its a goner! ha ha! Any ideas lads??? |
|
Posted 26th Oct 2010 at 02:33
|
|
|
hudson603
Senior User Location: Burgess Hill Registered: 29 May 2005 Posts: 988 Status: Offline |
Post #7
So got it to this stage but god knows what to do with it now!! |
|
Posted 31st Oct 2010 at 17:17
|
|
|
sixysix
Seasoned Pro  Location: London Registered: 27 Mar 2006 Posts: 2,659 Status: Offline |
Post #8
hudson603 wrote: So got it to this stage but god knows what to do with it now!! Make a colage of docrs, nurses, and patients around the lion?  Just mask the lion, then respray the rest. It might be easier to spray the whole thing, then get a very fine sandpaper/micromesh, then rub off the paint from the lion to reveal the chrome again  ________________________________________ My Pugrun 2007/2009 video clipsTake a look Pugrun 2007...Lose yourself  Xbox Live ID: Marksixysix (Forza 3, Forza 4 PES 2010, COD 6/MW2, WRC 2010). PSN ID: MarkSixysix ( DiRT 3 GT5, NFS:Hot pursuit). P1 Diablo red 6 gone but not forgotten  |
|
Posted 31st Oct 2010 at 20:33
|
|
|
hudson603
Senior User Location: Burgess Hill Registered: 29 May 2005 Posts: 988 Status: Offline |
Post #9
 Knew I should've been more careful with the location of the photo!The problem with respraying is that the marks you can see around the lion is actually where the metal has pitted?? not sure if thats the right term but I think if I spray it you will still be able to see the little blemishes... |
|
Posted 1st Nov 2010 at 01:47
|
|
|
sixysix
Seasoned Pro Location: London Registered: 27 Mar 2006 Posts: 2,659 Status: Offline |
Post #10
hudson603 wrote: Knew I should've been more careful with the location of the photo!The problem with respraying is that the marks you can see around the lion is actually where the metal has pitted?? not sure if thats the right term but I think if I spray it you will still be able to see the little blemishes... I thought I would say it before someone else did Could use some putty filler first if the pitting is deeper. If it's higher than the metal, then will just need smoothing off a bit more. But yes your right, the better the prep, the better the finish will be ________________________________________ My Pugrun 2007/2009 video clipsTake a look Pugrun 2007...Lose yourself Xbox Live ID: Marksixysix (Forza 3, Forza 4 PES 2010, COD 6/MW2, WRC 2010). PSN ID: MarkSixysix ( DiRT 3 GT5, NFS:Hot pursuit). P1 Diablo red 6 gone but not forgotten |
|
Posted 1st Nov 2010 at 02:44
|
|
|
hudson603
Senior User Location: Burgess Hill Registered: 29 May 2005 Posts: 988 Status: Offline |
Post #11
Well its gone from looking a bit battered, to bare, and now to this... What do you recon? Its obviously not perfect but it looks a hell of a lot better than it did! Just need something to stick it back on with now... hmmm... |
|
Posted 9th Nov 2010 at 20:20
|
|
|
jakeypoo
Regular  Location: Kent Registered: 22 Sep 2010 Posts: 318 Status: Offline |
Post #12
Glue gun! I took mine off and sprayed it up but mine is the flush one! |
|
Posted 9th Nov 2010 at 22:29
|
|
|
sixysix
Seasoned Pro Location: London Registered: 27 Mar 2006 Posts: 2,659 Status: Offline |
Post #13
Looks alright that Can still see the imperfections in the pic but won't notice when on the car. Is that Astor btw? As for sticking back on, double sided pads, glue, no nails I use this double sided tape I got off fleabay that is nice and thin and stupidly strong. Works really well for this kind of thing as long as it's a flat surface ________________________________________ My Pugrun 2007/2009 video clipsTake a look Pugrun 2007...Lose yourself Xbox Live ID: Marksixysix (Forza 3, Forza 4 PES 2010, COD 6/MW2, WRC 2010). PSN ID: MarkSixysix ( DiRT 3 GT5, NFS:Hot pursuit). P1 Diablo red 6 gone but not forgotten |
|
Posted 10th Nov 2010 at 01:24
|
|
|
hudson603
Senior User Location: Burgess Hill Registered: 29 May 2005 Posts: 988 Status: Offline |
Post #14
It's Ford Graphite Grey actually, yeah you can still see them but I'm happy with it. I thought about some kind of sticky tape but the bit it needs to be stuck on is uneven and not sure it would work! |
|
Posted 10th Nov 2010 at 01:49
|
|
|
sixysix
Seasoned Pro Location: London Registered: 27 Mar 2006 Posts: 2,659 Status: Offline |
Post #15
hudson603 wrote: It's Ford Graphite Grey actually, yeah you can still see them but I'm happy with it. I thought about some kind of sticky tape but the bit it needs to be stuck on is uneven and not sure it would work! Cool, Well you may laugh but no nails will work just fine mate ________________________________________ My Pugrun 2007/2009 video clipsTake a look Pugrun 2007...Lose yourself Xbox Live ID: Marksixysix (Forza 3, Forza 4 PES 2010, COD 6/MW2, WRC 2010). PSN ID: MarkSixysix ( DiRT 3 GT5, NFS:Hot pursuit). P1 Diablo red 6 gone but not forgotten |
|
Posted 10th Nov 2010 at 01:55
|
|
|
arigti6
Seasoned Pro  Location: Wiltshire Registered: 24 Jan 2010 Posts: 2,365 Status: Offline |
Post #16
Not sure if this would interest you as you seem to have things in order, so Just a heads up! The badge shown is for a 106 but I know someone who had one made up for a 306 to his own specification from this website...clickyI believe the price for the 106 one to be about £7 posted so 306 one may be a bit more. ________________________________________ I Live for the 306 TEAM CHERRY PINK RALLYE 2008 BMW ///M 320d |
|
Posted 22nd Nov 2010 at 17:37
|
|
|
ballardpaul
Seasoned Pro  Location: Croydon Registered: 22 Jul 2008 Posts: 4,135 Status: Offline |
Post #17
Used no nails on mine. Did mine all black as mine looked like yours. ________________________________________ Phase 2 Blaze GTi 6 (Standard) SoldPhase 3 Supercharged China GTi 6 (249.8 BHP) Sold Phase 3 Supercharged Diablo GTi 6 (443 BHP)Sold Nissan 350Z (300 BHP) |
|
Posted 22nd Nov 2010 at 17:27
|
|
|
hovis16
Seasoned Pro  Location: Reading/parts for sale Registered: 21 Nov 2008 Posts: 4,304 Status: Offline |
Post #18
just cut the tabs on the back and sand it down paint it and stick it back on. thats what i did with superglue lol still on their now________________________________________ Ph2 Black GTI 6!EX black 6 owner But now a Black caged rallye owner Hunting for Go faster bits! SEARCH click here |
|
Posted 22nd Nov 2010 at 19:06
|
|
|
coskev
Seasoned Pro  Location: Oswestry Registered: 01 Nov 2009 Posts: 3,132 Status: Offline |
Post #19
arigti6 wrote: Not sure if this would interest you as you seem to have things in order, so Just a heads up! The badge shown is for a 106 but I know someone who had one made up for a 306 to his own specification from this website...clickyI believe the price for the 106 one to be about £7 posted so 306 one may be a bit more. Nice find  They list a 306 one now  Just emailed to see if they can do other colours ________________________________________ Red GTB1756 powered Fabia VRS daily driver,LBSC Gti6 eater........Mac1 ZR R1 kit car build in progress. |
|
Posted 25th Nov 2010 at 02:20
|
|
|
jakeypoo
Regular Location: Kent Registered: 22 Sep 2010 Posts: 318 Status: Offline |
Post #20
Yer they list it now as I ordered this one and they put it on the website to make ordering easier! Just drop Them an email with the colour you want and they will chuck it up on the website to order! |
|
Posted 25th Nov 2010 at 10:02
|
|
|
ballardpaul
Seasoned Pro Location: Croydon Registered: 22 Jul 2008 Posts: 4,135 Status: Offline |
Post #21
Are they stickers? i.e. quite thin?________________________________________ Phase 2 Blaze GTi 6 (Standard) SoldPhase 3 Supercharged China GTi 6 (249.8 BHP) Sold Phase 3 Supercharged Diablo GTi 6 (443 BHP)Sold Nissan 350Z (300 BHP) |
|
Posted 25th Nov 2010 at 14:45
|
|
|
jakeypoo
Regular Location: Kent Registered: 22 Sep 2010 Posts: 318 Status: Offline |
Post #22
Will put up a picture when it comes through! |
|
Posted 25th Nov 2010 at 17:40
|
|
|
eliotrw
Seasoned Pro  Location: Southwark Registered: 18 Jul 2010 Posts: 4,864 Status: Offline |
Post #23
how did you take off the badge?can you do it without breaking stuff? i only ask as if it was easy i would buy the whole thing of peugeot then take off the new badge and put it in the old assembly thing. But if its harder than that im not sure i can be bothered, my badge is in a similar condition to what yours was see. ________________________________________ Ex- Phase 3 China GTi-6 T-Reg |
|
Posted 26th Nov 2010 at 04:49
|
|
|
ballardpaul
Seasoned Pro Location: Croydon Registered: 22 Jul 2008 Posts: 4,135 Status: Offline |
Post #24
Yeah just work it out with a screwdriver, it's only stuck in with glue. ________________________________________ Phase 2 Blaze GTi 6 (Standard) SoldPhase 3 Supercharged China GTi 6 (249.8 BHP) Sold Phase 3 Supercharged Diablo GTi 6 (443 BHP)Sold Nissan 350Z (300 BHP) |
|
Posted 26th Nov 2010 at 21:10
|
|
|
hovis16
Seasoned Pro Location: Reading/parts for sale Registered: 21 Nov 2008 Posts: 4,304 Status: Offline |
Post #25
 they have a yellow one ________________________________________ Ph2 Black GTI 6!EX black 6 owner But now a Black caged rallye owner Hunting for Go faster bits! SEARCH click here |
|
Posted 26th Nov 2010 at 21:15
|
|
Pages (2): [1] 2
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.