Post #1
Anyone know ?I have a P3 HDI that I am breaking, my brother has a P1 XSI which needs its door looms replacing
Anyoen know if they will fit ?
|
displaying posts 1 to 4 of 4
| Author | Subject: P3 door looms work on P1 ? |
 silky
Seasoned Pro  Location: Chelmsford, Essex Registered: 29 Dec 2002 Posts: 3,471 Status: Offline |
I have a P3 HDI that I am breaking, my brother has a P1 XSI which needs its door looms replacing Anyoen know if they will fit ? |
 Posted 6th Jan 2010 at 23:03
|
|
|
thugpuggin
Seasoned Pro  Location: Bristol Registered: 10 Apr 2004 Posts: 26,784 Status: Offline |
Post #2
They will fit but iirc pin outs on things like window switch are different so all features may not work.________________________________________ Black X Reg PIII.VGTi 6 A4212 pt 1 A4212 pt 2 Searching the streets of Bristol for 1.36p/day.Joint Kent Leader |
|
Posted 6th Jan 2010 at 23:07
|
|
|
fozzy_255
Senior User  Location: portsmouth/Folkestone Registered: 30 Dec 2007 Posts: 677 Status: Offline |
Post #3
I have ph2/3 door looms on my ph1 and works fine, has e/w and central locking |
|
Posted 6th Jan 2010 at 23:52
|
|
|
rudolf
Seasoned Pro  Location: Skelmersdale Registered: 07 Apr 2004 Posts: 2,769 Status: Offline |
Post #4
I noticed phase 3 ones at a scrap yard looked different to phase 2 but could haver the same connector inside.________________________________________ S Reg Diablo standardsSpec SORNEDR Reg Nile standard spec written off then repaired X Reg Astor in need of TLC R Reg Nile to restore Set of Lions to fit. |
|
Posted 7th Jan 2010 at 00:31
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2025 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.