|
displaying posts 1 to 10 of 10
| Author | Subject: bike bodies? |
 fb_seven
Regular  Location: aylesbury Registered: 01 Oct 2009 Posts: 125 Status: Offline |
Post #1
i think im gunna keep my pug now lol. and wana get some throttle bodies will bike ones go straight on if so what ones and will there be much of a difference in power? if not where can i get hold of some car bodies for it cheers. |
 Posted 15th Dec 2009 at 22:43
|
|
jeffers
Forum Admin Location: Leeds Registered: 14 Dec 2003 Posts: 3,702 Status: Offline |
Post #2
Theres a thread some where gimme two mins i'll put a link up....*edit* Here it is! Bikebodiesprojectclicky  ________________________________________ Team Running Engine again!Team Negative Camber! My Budget track engine build thread! Now appearing at a Trackday near you!!  |
|
Posted 15th Dec 2009 at 23:14
|
|
|
fb_seven
Regular Location: aylesbury Registered: 01 Oct 2009 Posts: 125 Status: Offline |
Post #3
nice one cheers mate |
|
Posted 15th Dec 2009 at 23:08
|
|
|
nev6
Regular  Location: norwich Registered: 28 Dec 2007 Posts: 440 Status: Offline |
Post #4
some gsxr 1000 bodies with inlet manifold on the bay at the mo, i'll try and find them________________________________________ ex team astorstill team miami 205 gti-6 |
|
Posted 15th Dec 2009 at 23:11
|
|
|
nev6
Regular Location: norwich Registered: 28 Dec 2007 Posts: 440 Status: Offline |
Post #5
found thembodies-Clicky ________________________________________ ex team astorstill team miami 205 gti-6 |
|
Posted 15th Dec 2009 at 23:14
|
|
|
fb_seven
Regular Location: aylesbury Registered: 01 Oct 2009 Posts: 125 Status: Offline |
Post #6
very nice lol cheers mate, what else will i need to fit them? and what sort of power gain will they make. |
|
Posted 15th Dec 2009 at 23:15
|
|
|
jeffers
Forum Admin Location: Leeds Registered: 14 Dec 2003 Posts: 3,702 Status: Offline |
Post #7
Link to thread showin how to do it is in my original post buddy! ________________________________________ Team Running Engine again!Team Negative Camber! My Budget track engine build thread! Now appearing at a Trackday near you!! |
|
Posted 15th Dec 2009 at 23:17
|
|
|
fb_seven
Regular Location: aylesbury Registered: 01 Oct 2009 Posts: 125 Status: Offline |
Post #8
cheers buddy |
|
Posted 15th Dec 2009 at 23:18
|
|
|
jeffers
Forum Admin Location: Leeds Registered: 14 Dec 2003 Posts: 3,702 Status: Offline |
Post #9
fb_seven wrote: very nice lol cheers mate, what else will i need to fit them? and what sort of power gain will they make. The project Yanni did is very in depth, i will be doing this myself soon, its quite a long read but tells you everythin you need to know! ________________________________________ Team Running Engine again!Team Negative Camber! My Budget track engine build thread! Now appearing at a Trackday near you!! |
|
Posted 15th Dec 2009 at 23:18
|
|
|
nev6
Regular Location: norwich Registered: 28 Dec 2007 Posts: 440 Status: Offline |
Post #10
jeffers wrote: fb_seven wrote: very nice lol cheers mate, what else will i need to fit them? and what sort of power gain will they make. The project Yanni did is very in depth, i will be doing this myself soon, its quite a long read but tells you everythin you need to know! apart from the power gain iirc yanni did it using the xsara ecu, and i think did not reap the full benefits i would advise an aftermarket ecu for running any sort of bodies ________________________________________ ex team astorstill team miami 205 gti-6 |
|
Posted 15th Dec 2009 at 23:39
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.