a new beginning - Projects Forum - Peugeot 306 GTi-6 & Rallye Owners Club

displaying posts 1 to 25 of 230

Pages (10): [1] 2 3 .. last

Author

Subject: a new beginning

peugeot dave

Regular

Location: southampton

Registered: 04 Aug 2009

Posts: 227

Status: Offline

Post #1

Yep im another newbee and here's the story.
i had a blaze gti 6 a year ago with huge plans of track days and lots of lift off oversteer..... and then after a while the car got a tappet noise and got worse and worse i was too worried to get it fixed as cost was going to be quite steep so without any thought i sold her.
now here i am a year later and i got another blaze 6 and guess what........... its another duffer lol had a huge bottom end knock and i knew this when i brought it.
so heres the plan a full rebuild with lots of help from chris maybe daveyboy Roll eyes

the engine is having a high compression set of pistons thanks to rich w.along with uprated everything bottem end bearings gugeon pins lightened flywheel and so on.
i dont no where this project is going yet but i want speed and reliability without breaking the bank and without going supercharged so im open to coool ideas. beginning pics to follow a bit later

________________________________________

my car's spending all my money grrrrrrrrrr

Posted 21st Aug 2009 at 04:02

Profile

chris with a pug

Seasoned Pro

Location: Southampton

Registered: 16 Feb 2003

Posts: 5,366

Status: Offline

Post #2

Oh dear look who it is.

this is Daves car

Posted 4th Aug 2009 at 03:18

Profile

monkeyman

Seasoned Pro

Location: Sunny St Albans

Registered: 01 Oct 2008

Posts: 1,955

Status: Offline

Post #3

I guess cams/ Throttle bodies will get you gains, but they are pretty good as standard. Work out what you will be using the car for, and watch out for competition limitations.

________________________________________

Spanner Monkeys Monkey Spanner
Forum Search Clicky

Posted 4th Aug 2009 at 18:17

Profile

dan gti-6

Regular

Location: Winchester

Registered: 26 Jan 2008

Posts: 112

Status: Offline

Post #4

chris with a pug wrote:

Oh dear look who it is.

this is Daves car

So who is going to own up to sending a set of rods to the engineers to be checked/repaired without any nuts to torque the bloody things up!

Whistle

Posted 4th Aug 2009 at 22:44

Profile

chris with a pug

Seasoned Pro

Location: Southampton

Registered: 16 Feb 2003

Posts: 5,366

Status: Offline

Post #5

dan gti-6 wrote:

chris with a pug wrote:

Oh dear look who it is.

this is Daves car

So who is going to own up to sending a set of rods to the engineers to be checked/repaired without any nuts to torque the bloody things up!

Whistle

that was all Dave I am afraid LOL

I really need to remember to send mine in when my block goes there now

Posted 4th Aug 2009 at 23:35

Profile

miles

Seasoned Pro

Location: Ringwood

Registered: 28 Dec 2002

Posts: 3,433

Status: Offline

Post #6

About time there was some more of us down here

________________________________________

306 Rallye Sptint/Race Car, 205 CTI 1.9 8v to name a few

Road, Track and Race/Rally car preparation to your personal requirements,
Full Workshop & Diagnostic Facilities
New and Second parts, from Plugs to Turbo's
We now also carry out Routine Servicing
www.pugracing.com

& FB Page, https://www.facebook.com/PugRacing

Ebay; http://stores.ebay.co.uk/Pug-Racing-Shop

2012/2013/2014/2019 Class Winners at Gurston Down Speed Hillclimb & Joint overall, Class record too along the way,

Posted 5th Aug 2009 at 00:40

Profile

peugeot dave

Regular

Location: southampton

Registered: 04 Aug 2009

Posts: 227

Status: Offline

Post #7

yeah my bad as the project is named 'with no clue' lol
anyway i kinda have a good excuse as one minuite my car was whole then chris came allong and ripped her all appart in no time. i guess i was suffering from shell shock takes a while to recover thats my excuse and im stickin to it

________________________________________

my car's spending all my money grrrrrrrrrr

Posted 5th Aug 2009 at 00:59

Profile

peugeot dave

Regular

Location: southampton

Registered: 04 Aug 2009

Posts: 227

Status: Offline

Post #8

competition limitations ?

________________________________________

my car's spending all my money grrrrrrrrrr

Posted 5th Aug 2009 at 01:00

Profile

chris with a pug

Seasoned Pro

Location: Southampton

Registered: 16 Feb 2003

Posts: 5,366

Status: Offline

Post #9

You cant blame me, thought it would of been back togehter by now and I think he means if u want to race it

Posted 5th Aug 2009 at 01:10

Profile

peugeot dave

Regular

Location: southampton

Registered: 04 Aug 2009

Posts: 227

Status: Offline

Post #10

chris with a pug wrote:

Oh dear look who it is.

this is Daves car

your mum

________________________________________

my car's spending all my money grrrrrrrrrr

Posted 5th Aug 2009 at 01:23

Profile

peugeot dave

Regular

Location: southampton

Registered: 04 Aug 2009

Posts: 227

Status: Offline

Post #11

monkeyman wrote:

I guess cams/ Throttle bodies will get you gains, but they are pretty good as standard. Work out what you will be using the car for, and watch out for competition limitations.

depending on how much bodies are they could be a cool idea. are they a worthwile gain

________________________________________

my car's spending all my money grrrrrrrrrr

Posted 5th Aug 2009 at 01:25

Profile

peugeot dave

Regular

Location: southampton

Registered: 04 Aug 2009

Posts: 227

Status: Offline

Post #12

chris with a pug wrote:

You cant blame me, thought it would of been back togehter by now and I think he means if u want to race it

i wanna track day it for sure.
im still wating for comfirmation of me pistons wont be long now

________________________________________

my car's spending all my money grrrrrrrrrr

Posted 5th Aug 2009 at 01:28

Profile

peugeot dave

Regular

Location: southampton

Registered: 04 Aug 2009

Posts: 227

Status: Offline

Post #13

miles wrote:

About time there was some more of us down here

howdy miles cheers for the crank Big grin

not had it checked yet been real busy but im sure it will be fine will take one big trip to oselbury and give them everything in one go

________________________________________

my car's spending all my money grrrrrrrrrr

Posted 5th Aug 2009 at 01:32

Profile

chris with a pug

Seasoned Pro

Location: Southampton

Registered: 16 Feb 2003

Posts: 5,366

Status: Offline

Post #14

Have a read of this if your thinking bout throttle bodies

Jims Car

Posted 5th Aug 2009 at 01:33

Profile

peugeot dave

Regular

Location: southampton

Registered: 04 Aug 2009

Posts: 227

Status: Offline

Post #15

They look awesomme think ill save that for a whileeeeeeeeeeee looks like a nightmare to do is jim happy with them tho

________________________________________

my car's spending all my money grrrrrrrrrr

Posted 5th Aug 2009 at 02:11

Profile

miles

Seasoned Pro

Location: Ringwood

Registered: 28 Dec 2002

Posts: 3,433

Status: Offline

Post #16

It's easy, No really it is

________________________________________

Posted 5th Aug 2009 at 05:34

Profile

peugeot dave

Regular

Location: southampton

Registered: 04 Aug 2009

Posts: 227

Status: Offline

Post #17

cool hope santa brings me a set for crimbo lol

________________________________________

my car's spending all my money grrrrrrrrrr

Posted 9th Aug 2009 at 22:46

Profile

peugeot dave

Regular

Location: southampton

Registered: 04 Aug 2009

Posts: 227

Status: Offline

Post #18

had a quit day at the garage today got lots of bits refurbed and painted ac pump, alternator, engine mount, ps pump and so on.
chris refurbed my oil pump while i was mincing arround in the garage avoiding the oil and dirt LOL

hope to be getting my pistons and bearings up togther soon and get my engine back.
my wallet is gonna get a battering for this Sad

will get pics sortrd got a prob and need some help with this.

________________________________________

my car's spending all my money grrrrrrrrrr

Posted 9th Aug 2009 at 22:56

Profile

peugeot dave

Regular

Location: southampton

Registered: 04 Aug 2009

Posts: 227

Status: Offline

Post #19

so heres the 6 getting stripped. i wasen't going to refurb the engine bay but i have been convinced that i should as some rust had started to creep through.wire bit here i come take note probably the last time the missus gets near the 6 she's getting fed up already Unsure

________________________________________

my car's spending all my money grrrrrrrrrr

Posted 14th Aug 2009 at 04:39

Profile

daveyboy

aka Jim Davey

Location: Southampton

Registered: 01 Oct 2007

Posts: 8,648

Status: Offline

Post #20

peugeot dave wrote:

They look awesomme think ill save that for a whileeeeeeeeeeee looks like a nightmare to do is jim happy with them tho

________________________________________

R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.

Some of my services: (See my for sale threads)
Engine mount/chassis repair
Solid Beam Mounts BACK IN PRODUCTION
Harness bars

Posted 13th Aug 2009 at 06:03

Profile

chris with a pug

Seasoned Pro

Location: Southampton

Registered: 16 Feb 2003

Posts: 5,366

Status: Offline

Post #21

But you both really want 'chargers!!!!!

Posted 13th Aug 2009 at 13:16

Profile

daveyboy

aka Jim Davey

Location: Southampton

Registered: 01 Oct 2007

Posts: 8,648

Status: Offline

Post #22

Chargers are for people who need to make up for bieng shit at corners Razz

________________________________________

Posted 13th Aug 2009 at 14:21

Profile

chris with a pug

Seasoned Pro

Location: Southampton

Registered: 16 Feb 2003

Posts: 5,366

Status: Offline

Post #23

And you dont have one because????????

Posted 13th Aug 2009 at 19:57

Profile

peugeot dave

Regular

Location: southampton

Registered: 04 Aug 2009

Posts: 227

Status: Offline

Post #24

daveyboy wrote:

Chargers are for people who need to make up for bieng shit at corners Razz

im with you on that naturally aspirated all the way baby

________________________________________

my car's spending all my money grrrrrrrrrr

Posted 14th Aug 2009 at 03:09

Profile

mark-house

Seasoned Pro

Location: Bury St Edmunds

Registered: 07 Apr 2009

Posts: 1,096

Status: Offline

Post #25

nice mini what has been done to it?

________________________________________

Peugeot 306 GTi 6
BMW 320 td compact M-sport
1967 Mini Cooper
1990 Jaguar XJR 4.0

Posted 14th Aug 2009 at 03:11

Profile

Pages (10): [1] 2 3 .. last

All times are GMT. The time is now 21:17

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy. (NEW HOST)