Many thank yous
pixelate1 has attached the following image:
|
displaying posts 1 to 5 of 5
Author | Subject: Whats this ?? |
pixelate1
Newbie Location: TGA Registered: 16 Oct 2011 Posts: 8 Status: Offline |
Post #1
Hey guys dose anyone know where these go ??? They were included in the head-gasket kit. Many thank yous pixelate1 has attached the following image: |
Posted 7th Aug 2016 at 05:01
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,838 Status: Offline |
Post #2
spares.________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
Posted 7th Aug 2016 at 06:41
|
pixelate1
Newbie Location: TGA Registered: 16 Oct 2011 Posts: 8 Status: Offline |
Post #3
looks like they'll be Staying in the glove box for the next few years, Thanks welsh |
Posted 7th Aug 2016 at 06:43
|
cully
Seasoned Pro Location: Cullompton Registered: 12 Jun 2013 Posts: 1,093 Status: Offline |
Post #4
large black ring is eitherwater outlet gasket on the back of the block square profile or thermostat seal if it is slotted around the inside copper washer is air vent seal on the thermostat housing |
Posted 7th Aug 2016 at 08:41
|
pixelate1
Newbie Location: TGA Registered: 16 Oct 2011 Posts: 8 Status: Offline |
Post #5
Arr Thanks cully ill check it out tomorrow |
Posted 7th Aug 2016 at 10:54
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.