|
displaying posts 1 to 5 of 5
| Author | Subject: Roll centre adjustment kit or extended ball joints (16mm) |
 CalGTI6
Newbie  Location: Shrivenham Registered: 31 Dec 2013 Posts: 5 Status: Offline |
Post #1
Gday from Melbourne, Australia, I am desperately chasing either a set of the Bridgecraft roll centre adjustment kit or extended ball joints in 16mm. I have a race meeting here on the 22nd July and need to get the front of my six down quite a bit! Appreciate the help in advance guys.. Cheers, Cal ________________________________________ CalMUH! Motorsport |
 Posted 7th Jul 2016 at 00:07
|
|
|
pete_rallye
Seasoned Pro  Location: Yorkshire Registered: 12 Dec 2002 Posts: 5,253 Status: Offline |
Post #2
http://bridgecraftmotorsport.co.uk/ you can contact Allan directly on the link above, probably the best way to get some asap. ________________________________________ Oulton Park in a BTCC 306 vid 1Oulton Park in a BTCC 306 vid 2 Lap of the 'ring |
|
Posted 7th Jul 2016 at 00:14
|
|
|
CalGTI6
Newbie Location: Shrivenham Registered: 31 Dec 2013 Posts: 5 Status: Offline |
Post #3
Thanks Pete, Allan wasn't keen stating they had issues with hub angles and the requirement for longer drive shafts etc. Interested to hear from user's experience on here, also would love to hear about whatever those green extended ball joints were that I saw on here, how well they worked and where they came from! ________________________________________ CalMUH! Motorsport |
|
Posted 7th Jul 2016 at 06:25
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,839 Status: Offline |
Post #4
quote: I have a race meeting here on the 22nd July and want to get the front of my six down quite a bit! efa. raise the back? ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 7th Jul 2016 at 08:48
|
|
|
CalGTI6
Newbie Location: Shrivenham Registered: 31 Dec 2013 Posts: 5 Status: Offline |
Post #5
Sorry mate, not down on the acronyms. EFA? Rake looks ok, but you're right that is an option. I would like to get it out of the airstream a little as rules permit and I've done a little CFD. ________________________________________ CalMUH! Motorsport |
|
Posted 7th Jul 2016 at 09:11
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.