Author	Subject: Head dowel pins
6box Newbie Location: Norwich Registered: 23 Jan 2014 Posts: 41 Status: Offline	Post #1 Just in the process of the changing the head over on my 306, however when i took the old one off there was no dowel pins in the block for head alignment. Does anyone know where i can buy some of these or what size they are meant to be?
Posted 11th Nov 2015 at 11:55 Profile

fatlapit Seasoned Pro Location: STOCKSFIELD Registered: 02 Nov 2010 Posts: 3,040 Status: Offline	Post #2 Look in the head u took off ________________________________________
Posted 11th Nov 2015 at 12:16 Profile

welshpug! Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,839 Status: Offline	Post #3 or the gasket ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.com Bring on the Trumpets.
Posted 11th Nov 2015 at 12:19 Profile

bigbadbowen Seasoned Pro Location: Winchester Registered: 21 Nov 2003 Posts: 13,753 Status: Offline	Post #4 Lol I did exactly this missed one in the head so had to undo it and start again
Posted 11th Nov 2015 at 12:20 Profile

6box Newbie Location: Norwich Registered: 23 Jan 2014 Posts: 41 Status: Offline	Post #5 I will double check but i couldn't see them anywhere in the old head. would it even be possible to fit a head without these?
Posted 11th Nov 2015 at 15:27 Profile

bigbadbowen Seasoned Pro Location: Winchester Registered: 21 Nov 2003 Posts: 13,753 Status: Offline	Post #6 Yup it's just tricky to do I fitted one with only 1 then realised where the other was
Posted 11th Nov 2015 at 15:42 Profile

welshpug! Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,839 Status: Offline	Post #7 possible, but not at all advisable. ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.com Bring on the Trumpets.
Posted 11th Nov 2015 at 16:48 Profile

6box Newbie Location: Norwich Registered: 23 Jan 2014 Posts: 41 Status: Offline	Post #8 Of course not. I've had another look and they definitely are not there Does anyone have any sitting around I could buy?
Posted 11th Nov 2015 at 20:15 Profile

The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.