Post #1
Any about ?? ________________________________________
Silver phase 2.5 gti6
|
displaying posts 1 to 14 of 14
| Author | Subject: Inlet maniforld badge for phase 2 gti6 |
 Woodygti6
Newbie  Location: Oxford Registered: 07 Jul 2015 Posts: 30 Status: Offline |
|
 Posted 5th Aug 2015 at 09:56
|
|
gnrlee
Forum Admin Location: Leeds Registered: 20 Aug 2005 Posts: 8,882 Status: Offline |
Post #2
I have a Lion that used to be a keyring I was going to take a cast of it and make them in epoxy resin (coloured with a carbon fibre base)2 secs i'll put up an example if i get enough interest i'll make a few!  ________________________________________ Proud Member of the ASTOR Owners Club |
|
Posted 5th Aug 2015 at 09:58
|
|
|
gnrlee
Forum Admin Location: Leeds Registered: 20 Aug 2005 Posts: 8,882 Status: Offline |
Post #3
thats the original lion badge ive flattened it off now though so it should make a good mold! ________________________________________ Proud Member of the ASTOR Owners Club |
|
Posted 5th Aug 2015 at 10:04
|
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,796 Status: Offline |
Post #4
i might have one, i've not got one on my 205gti6 yet and it might go with the CF coilpack cover________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
|
Posted 5th Aug 2015 at 10:05
|
|
|
gnrlee
Forum Admin Location: Leeds Registered: 20 Aug 2005 Posts: 8,882 Status: Offline |
Post #5
 i'll make a mold and see how it turns out remember trying to press carbon fibre into that last mold I made but it didn't work out because of all the air bubbles it would push in and not even a hair dryer would help  but coloured resin should work great! ________________________________________ Proud Member of the ASTOR Owners Club |
|
Posted 5th Aug 2015 at 10:08
|
|
|
Woodygti6
Newbie Location: Oxford Registered: 07 Jul 2015 Posts: 30 Status: Offline |
Post #6
Thanks boy let me know how you get on need a mint one as I'm a perv lol ________________________________________ Silver phase 2.5 gti6 |
|
Posted 5th Aug 2015 at 10:10
|
|
|
gnrlee
Forum Admin Location: Leeds Registered: 20 Aug 2005 Posts: 8,882 Status: Offline |
Post #7
if your as fussy as I am you'll like it!if i'm not happy it gets sold cheap ________________________________________ Proud Member of the ASTOR Owners Club |
|
Posted 5th Aug 2015 at 10:13
|
|
|
RetroPug
Seasoned Pro  Location: Leicestershire Registered: 15 Jan 2013 Posts: 2,473 Status: Offline |
Post #8
Just in case it helps: the inlet manifolds are the same across phases.reproductions of standard ones are available plus custom ones but the guy isn't always easy to get hold of. I've had a custom onein my toolbox for a long, long time.  ________________________________________ 61k miles Ph.1 Diablo '6 Project Thread |
|
Posted 5th Aug 2015 at 18:32
|
|
|
Woodygti6
Newbie Location: Oxford Registered: 07 Jul 2015 Posts: 30 Status: Offline |
Post #9
gnrlee wrote: i'll make a mold and see how it turns out remember trying to press carbon fibre into that last mold I made but it didn't work out because of all the air bubbles it would push in and not even a hair dryer would help but coloured resin should work great! Have you got available now as I like the look of that? ________________________________________ Silver phase 2.5 gti6 |
|
Posted 5th Aug 2015 at 18:37
|
|
|
gnrlee
Forum Admin Location: Leeds Registered: 20 Aug 2005 Posts: 8,882 Status: Offline |
Post #10
I may have shortly!how ever i only have clear or white gel coat at the moment ________________________________________ Proud Member of the ASTOR Owners Club |
|
Posted 5th Aug 2015 at 19:49
|
|
|
gnrlee
Forum Admin Location: Leeds Registered: 20 Aug 2005 Posts: 8,882 Status: Offline |
Post #11
 I just used a gel coat just to see how it looked it came out spot on apart from the odd air bubble but that was because gel coat is really thick And it was just a tad on the sticky side but gives you the jist, ________________________________________ Proud Member of the ASTOR Owners Club |
|
Posted 5th Aug 2015 at 20:50
|
|
|
gnrlee
Forum Admin Location: Leeds Registered: 20 Aug 2005 Posts: 8,882 Status: Offline |
Post #12
started a new thread ________________________________________ Proud Member of the ASTOR Owners Club |
|
Posted 6th Aug 2015 at 12:51
|
|
|
Woodygti6
Newbie Location: Oxford Registered: 07 Jul 2015 Posts: 30 Status: Offline |
Post #13
gnrlee wrote: I just used a gel coat just to see how it looked it came out spot on apart from the odd air bubble but that was because gel coat is really thick And it was just a tad on the sticky side but gives you the jist, We're do I find the new thread buddy sorry I'm a newbie on here just getting to grips with it all ________________________________________ Silver phase 2.5 gti6 |
|
Posted 6th Aug 2015 at 12:58
|
|
|
gnrlee
Forum Admin Location: Leeds Registered: 20 Aug 2005 Posts: 8,882 Status: Offline |
Post #14
I started it in the for sale section but here Click Me! and this'll take you to the thread! ________________________________________ Proud Member of the ASTOR Owners Club |
|
Posted 6th Aug 2015 at 13:46
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.