Post #1
Is there anywhere that supplies larger diameter front anti roll bars for the 306?
|
displaying posts 1 to 12 of 12
| Author | Subject: Anti roll bars |
 Thomsongti6
Newbie  Location: Dalkieth Registered: 19 May 2014 Posts: 36 Status: Offline |
|
 Posted 26th Jul 2015 at 17:41
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,839 Status: Offline |
Post #2
no, because nobody wants more understeer.________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 26th Jul 2015 at 17:48
|
|
|
Thomsongti6
Newbie Location: Dalkieth Registered: 19 May 2014 Posts: 36 Status: Offline |
Post #3
So when hard cornering all the weight is to be forced on to one front strut? I'm not asking for a sold beam just slightly stiffer in the corners |
|
Posted 26th Jul 2015 at 19:33
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,839 Status: Offline |
Post #4
up the front spring rate.________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 26th Jul 2015 at 19:40
|
|
|
allanallen
Seasoned Pro Location: Buxton Registered: 01 May 2007 Posts: 1,399 Status: Offline |
Post #5
Spoox supply them, I'm sure you don't want one though if you're interested in going fast. ________________________________________ www.bridgecraftmotorsport.co.uk |
|
Posted 26th Jul 2015 at 21:08
|
|
|
Thomsongti6
Newbie Location: Dalkieth Registered: 19 May 2014 Posts: 36 Status: Offline |
Post #6
thanks but not an argument I'm going to get into it was a simple question for a simple answer |
|
Posted 27th Jul 2015 at 07:37
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,839 Status: Offline |
Post #7
im not arguing, stating simple fact  ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 27th Jul 2015 at 08:28
|
|
|
midlife
Seasoned Pro  Location: Colne, Lancashire Registered: 13 Mar 2006 Posts: 7,544 Status: Offline |
Post #8
Rear wheel drive cars you control body roll with a FRONT anti roll bar.front wheel drive cars you control body roll with a REAR anti roll bar. That's just the way it is......  ________________________________________ Get used to seeing the yellow one !!! Team 330™ Team "no front end or engine" Team "LIMITED EDITION" I live for the 306 sticker  Team 0-60 in 6.44 & standing qtr in 14.808 @ 94.55mph all with std engine 203bhp Corolla T-Sport daily driver stealthier than Kwai Chang Caine |
|
Posted 27th Jul 2015 at 09:07
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,839 Status: Offline |
Post #9
unless you build a chassis without arbs altogether  ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 27th Jul 2015 at 09:09
|
|
|
Chr1sch
Seasoned Pro  Location: Worcester Registered: 02 Aug 2014 Posts: 1,025 Status: Offline |
Post #10
welshpug! wrote: unless you build a chassis without arbs altogether Thats what McLaren did no? - Mp4 12C has no ARB's... |
|
Posted 30th Jul 2015 at 10:13
|
|
|
allanallen
Seasoned Pro Location: Buxton Registered: 01 May 2007 Posts: 1,399 Status: Offline |
Post #11
But then F1 cars have anti roll bars.... ________________________________________ www.bridgecraftmotorsport.co.uk |
|
Posted 30th Jul 2015 at 10:20
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,839 Status: Offline |
Post #12
Chr1sch wrote: welshpug! wrote: unless you build a chassis without arbs altogether Thats what McLaren did no? - Mp4 12C has no ARB's... they do have anti roll systems, they're linked hydraulic units, not a bar. ll depends on the entire setup philosohpy, a lot of hillclimb cars dont run any at all, we dont run one on the front of the widetrack rally saxo, as its a satchell front end, but it does run a rear arb. ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 30th Jul 2015 at 10:58
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.