|
displaying posts 1 to 9 of 9
| Author | Subject: 2.0i 16v cab engine and Gti6/Rallye bottom end the same? |
 Ben_W
Formerly gpm
 Location: Lutterworth Registered: 01 Sep 2007 Posts: 2,941 Status: Offline |
Post #1
Guys,Engine will be coming out of the Rallye soon so I can get into the engine bay to get all the crusty bits sorted. Mate has a bottom end from a 2ltr cab knocking about. I *think* the bottom ends were the same, was just the head that differed. Can anyone confirm this? Thanks ________________________________________ Cherry Red Rallye .... On going OEM spec restoChina Blue GTi6 .... Weekend toy Black 208 GTi .... Wife's car now Silver BMW 550i.... The executive missile |
 Posted 31st May 2015 at 00:11
|
|
stan_306gti6
Forum Admin Location: Kent Registered: 18 Jan 2004 Posts: 21,768 Status: Offline |
Post #2
Block is the same - the cab engine probably won't have the under piston oil spray bars though.Compression is also set at 10.4:1, whereas the Rallye lump is 10.8:1. ________________________________________ "Supercharged - 454.1bhp/317.5lb/ft"Peugeot 306 GTi-6 2000 (X), Moonstone  |
|
Posted 30th May 2015 at 23:18
|
|
|
Ben_W
Formerly gpm
Location: Lutterworth Registered: 01 Sep 2007 Posts: 2,941 Status: Offline |
Post #3
Thanks Stan.Compression difference can only be two things. Pistons or head? ________________________________________ Cherry Red Rallye .... On going OEM spec restoChina Blue GTi6 .... Weekend toy Black 208 GTi .... Wife's car now Silver BMW 550i.... The executive missile |
|
Posted 31st May 2015 at 00:10
|
|
|
rallyestyle
Seasoned Pro  Location: London Registered: 23 Jul 2003 Posts: 14,990 Status: Offline |
Post #4
A little off topic but im looking forward to your project update Ben, will be using it as a guide when i come to start working on my rallye you see  ________________________________________ Just Drive It |
|
Posted 31st May 2015 at 15:48
|
|
|
Ben_W
Formerly gpm
Location: Lutterworth Registered: 01 Sep 2007 Posts: 2,941 Status: Offline |
Post #5
No worries Tom!To be honest, there isn't a huge amount to update at the moment. I haven't really done much. In the next week or so it will be dragged off to my mates unit so we can finish the underside prep. We will also be taking the engine out of his GTi6 as its breathing very heavily and looks like the rings have gone so will be using that as a learn to take mine out so I can tidy the engine bay. Have, through my mate who owns the unit, been introduced to a guy who is a paint/restoration type. Have agreed that he will spray the underside and engine bay in 2k paint for £200. Will be a far, far better job than I'd get using rasttle cans. I'll update my project thread in a bit ________________________________________ Cherry Red Rallye .... On going OEM spec restoChina Blue GTi6 .... Weekend toy Black 208 GTi .... Wife's car now Silver BMW 550i.... The executive missile |
|
Posted 31st May 2015 at 16:14
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,838 Status: Offline |
Post #6
pistons, they have a pronounced dish rather than the barely perceptible one on the rs.________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 31st May 2015 at 18:39
|
|
|
Ben_W
Formerly gpm
Location: Lutterworth Registered: 01 Sep 2007 Posts: 2,941 Status: Offline |
Post #7
Thanks Mei.....It had to be them or the head...I was planning on building up the bottom end on that block and making it all fancy etc and then just dropping the head on from my Rallye. I guess I'd probably be better off finding a Rallye block... ________________________________________ Cherry Red Rallye .... On going OEM spec restoChina Blue GTi6 .... Weekend toy Black 208 GTi .... Wife's car now Silver BMW 550i.... The executive missile |
|
Posted 31st May 2015 at 18:43
|
|
|
Nose
Senior User  Location: Birmingham Registered: 23 Jun 2013 Posts: 994 Status: Offline |
Post #8
Have agreed that he will spray the underside and engine bay in 2k paint for £200. Will be a far, far better job than I'd get using rasttle cans.That's a very good price Ben. I was going to do that to mine having done all the underneath at the back - but after having the welding done, i really just want it back on the road for a bit - bloody sick of it sat in the garage  Good luck with yours ________________________________________ Bianca 306 Rallye.Mondeo Titanium X. |
|
Posted 31st May 2015 at 21:16
|
|
|
Ben_W
Formerly gpm
Location: Lutterworth Registered: 01 Sep 2007 Posts: 2,941 Status: Offline |
Post #9
Yeah, I thought so. Is a mates rates kinda deal I think! I'm please with it anyhoo________________________________________ Cherry Red Rallye .... On going OEM spec restoChina Blue GTi6 .... Weekend toy Black 208 GTi .... Wife's car now Silver BMW 550i.... The executive missile |
|
Posted 31st May 2015 at 21:55
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.
