|
displaying posts 1 to 8 of 8
| Author | Subject: Bottom rad hose. |
 Nose
Senior User  Location: Birmingham Registered: 23 Jun 2013 Posts: 994 Status: Offline |
Post #1
Hi guys, i know this has been covered many times, but i'm putting a new NISSENS rad in the Rallye soon - part number 61252A - just need to know what hose goes with this rad please, i also believe there is a small 'o' ring which should be changed. Can anyone help with the Pug numbers on these for me please guys.Thanks  ________________________________________ Bianca 306 Rallye.Mondeo Titanium X. |
 Posted 21st Mar 2015 at 11:29
|
|
|
jamesg
Newbie  Location: fife Registered: 29 Sep 2014 Posts: 21 Status: Offline |
Post #2
Hi mate part number for o ring seal is 133994  ________________________________________ James |
|
Posted 21st Mar 2015 at 14:00
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,838 Status: Offline |
Post #3
it "should" be the later type fitting with the metal end and metal wire clip.best to buy the latest type hose, comes with a new seal, about £20. ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 21st Mar 2015 at 14:07
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,838 Status: Offline |
Post #4
jamesg wrote: Hi mate part number for o ring seal is 133994 no, that's for the thermostat coupling to the top hose only. bottom hose is 1343 Z4 ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 21st Mar 2015 at 14:12
|
|
|
Nose
Senior User Location: Birmingham Registered: 23 Jun 2013 Posts: 994 Status: Offline |
Post #5
Thanks Mei, to the rescue again. ________________________________________ Bianca 306 Rallye.Mondeo Titanium X. |
|
Posted 21st Mar 2015 at 21:43
|
|
|
Nose
Senior User Location: Birmingham Registered: 23 Jun 2013 Posts: 994 Status: Offline |
Post #6
welshpug! wrote: jamesg wrote: Hi mate part number for o ring seal is 133994 no, that's for the thermostat coupling to the top hose only. bottom hose is 1343 Z4 So 1343 Z4 is the number for the 'o' ring, so from what i can see then is the correct hose 1351 Z3 ? ________________________________________ Bianca 306 Rallye.Mondeo Titanium X. |
|
Posted 23rd Mar 2015 at 13:45
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,838 Status: Offline |
Post #7
________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 23rd Mar 2015 at 13:57
|
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,795 Status: Offline |
Post #8
don't get mei started on the o-ring argument, him and stan fought over it for about 3 years solid  ________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
|
Posted 23rd Mar 2015 at 16:04
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.