|
displaying posts 1 to 6 of 6
| Author | Subject: Brake line/fuel line clip removal? |
 Ben_W
Formerly gpm  Location: Lutterworth Registered: 01 Sep 2007 Posts: 2,941 Status: Offline |
Post #1
Guys, Is there a way of removing them without breaking them or, as I suspect, do they all have those 'arrow' head clips which once in, ain't coming out without breaking them? ________________________________________ Cherry Red Rallye .... On going OEM spec restoChina Blue GTi6 .... Weekend toy Black 208 GTi .... Wife's car now Silver BMW 550i.... The executive missile |
 Posted 16th Feb 2015 at 08:31
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,839 Status: Offline |
Post #2
not sure which you mean?________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 16th Feb 2015 at 09:32
|
|
|
Ben_W
Formerly gpm Location: Lutterworth Registered: 01 Sep 2007 Posts: 2,941 Status: Offline |
Post #3
The clips under the car which hold the fuel lines in place down the length of the car and in places around the tank. Easy enough to remove the pipes from the clips. Getting the clips off the car is another matter!Same really for the brake line clips on the other side, plus the clips that hold the wiring loom on the same side as the brake lines. I've got the part numbers from service box but would rather not have to pay £1.75 for a clip of which I'll need at least 6 of one type etc..... ________________________________________ Cherry Red Rallye .... On going OEM spec restoChina Blue GTi6 .... Weekend toy Black 208 GTi .... Wife's car now Silver BMW 550i.... The executive missile |
|
Posted 16th Feb 2015 at 09:39
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,839 Status: Offline |
Post #4
ohhh, push the pins through.________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 16th Feb 2015 at 09:52
|
|
|
Ben_W
Formerly gpm Location: Lutterworth Registered: 01 Sep 2007 Posts: 2,941 Status: Offline |
Post #5
Elaborate a bit?!!I've only access to the clips from the underside of the car, not the top side. What do you mean by 'push the pins through'?? ________________________________________ Cherry Red Rallye .... On going OEM spec restoChina Blue GTi6 .... Weekend toy Black 208 GTi .... Wife's car now Silver BMW 550i.... The executive missile |
|
Posted 16th Feb 2015 at 09:55
|
|
|
Ben_W
Formerly gpm Location: Lutterworth Registered: 01 Sep 2007 Posts: 2,941 Status: Offline |
Post #6
Sorted now. Gently bending towards the front or the rear of the car brings them out ok________________________________________ Cherry Red Rallye .... On going OEM spec restoChina Blue GTi6 .... Weekend toy Black 208 GTi .... Wife's car now Silver BMW 550i.... The executive missile |
|
Posted 16th Feb 2015 at 11:55
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.