Post #1
After new thermostat bolts , does anyone no the part number , where's best place to source them other then dealer?
|
displaying posts 1 to 20 of 20
| Author | Subject: thermostat bolts |
 pete-gti
Seasoned Pro  Location: Kent Registered: 15 Feb 2009 Posts: 1,297 Status: Offline |
|
 Posted 3rd Nov 2014 at 13:58
|
|
|
RetroPug
Seasoned Pro  Location: Leicestershire Registered: 15 Jan 2013 Posts: 2,473 Status: Offline |
Post #2
A standard bolt of the correct thread will fit, it just won't have the bleed hole which isn't really a problem when bleeding.From memory the genuine bolts are pretty inexpensive from main dealers though if you want to do it properly. ________________________________________ 61k miles Ph.1 Diablo '6 Project Thread |
|
Posted 3rd Nov 2014 at 17:25
|
|
|
aaron6
Seasoned Pro  Location: On the sofa in maidstone Registered: 16 May 2006 Posts: 5,840 Status: Offline |
Post #3
A great place for bolts is MBE in Bearsted mate.________________________________________ See the sheer power and might of the lesser known burrowing owl. |
|
Posted 3rd Nov 2014 at 20:50
|
|
|
aaron6
Seasoned Pro Location: On the sofa in maidstone Registered: 16 May 2006 Posts: 5,840 Status: Offline |
Post #4
If you want stainless and they are a typical thread (standard M threads not Metric fines).________________________________________ See the sheer power and might of the lesser known burrowing owl. |
|
Posted 3rd Nov 2014 at 20:51
|
|
|
pete-gti
Seasoned Pro Location: Kent Registered: 15 Feb 2009 Posts: 1,297 Status: Offline |
Post #5
Just ordered shed loads from screwfix , but I'm after the very long stud bolts that hold the housing to the engine , its like to stud bars with nuts m6 I think ? |
|
Posted 4th Nov 2014 at 11:00
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,847 Status: Offline |
Post #6
servicebox have the numbers, and often the dimensions.________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 4th Nov 2014 at 11:07
|
|
|
pete-gti
Seasoned Pro Location: Kent Registered: 15 Feb 2009 Posts: 1,297 Status: Offline |
Post #7
Can't get service box to work |
|
Posted 4th Nov 2014 at 11:14
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,847 Status: Offline |
Post #8
Doesn't work well on a phone ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 4th Nov 2014 at 11:57
|
|
|
RetroPug
Seasoned Pro Location: Leicestershire Registered: 15 Jan 2013 Posts: 2,473 Status: Offline |
Post #9
Ah sorry thought you meant the bleed screw.________________________________________ 61k miles Ph.1 Diablo '6 Project Thread |
|
Posted 4th Nov 2014 at 12:35
|
|
|
aaron6
Seasoned Pro Location: On the sofa in maidstone Registered: 16 May 2006 Posts: 5,840 Status: Offline |
Post #10
Get some dimensions and I'll see if we have any here. ________________________________________ See the sheer power and might of the lesser known burrowing owl. |
|
Posted 4th Nov 2014 at 14:57
|
|
|
pete-gti
Seasoned Pro Location: Kent Registered: 15 Feb 2009 Posts: 1,297 Status: Offline |
Post #11
Its the thread one with the nut , I have these missing  |
|
Posted 4th Nov 2014 at 18:29
|
|
|
pete-gti
Seasoned Pro Location: Kent Registered: 15 Feb 2009 Posts: 1,297 Status: Offline |
Post #12
The one that's not high lighted |
|
Posted 4th Nov 2014 at 18:38
|
|
|
pete-gti
Seasoned Pro Location: Kent Registered: 15 Feb 2009 Posts: 1,297 Status: Offline |
Post #13
, if I just get bit of stud and a nut should do the job |
|
Posted 5th Nov 2014 at 14:09
|
|
rikky
Pikey Location: cheshire Registered: 28 Feb 2004 Posts: 26,797 Status: Offline |
Post #14
see hererikky has attached the following image: ________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
|
Posted 5th Nov 2014 at 14:19
|
|
|
rikky
Pikey Location: cheshire Registered: 28 Feb 2004 Posts: 26,797 Status: Offline |
Post #15
i see the forum resizes things so they're out of scale  looks like: 6939 97 NUT WITH WASHER DIAM 6X100-7-18 6930 82 STUD 6X100-9-78-10 mine snapped on my engine when putting a new thermostat gasket on, had to wind it out and put a new one in ________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
|
Posted 5th Nov 2014 at 14:23
|
|
|
pete-gti
Seasoned Pro Location: Kent Registered: 15 Feb 2009 Posts: 1,297 Status: Offline |
Post #16
Cheers rick , hopefully I can get these from dealer , I'm only after the stud bolts there's 2 , |
|
Posted 5th Nov 2014 at 14:32
|
|
|
rikky
Pikey Location: cheshire Registered: 28 Feb 2004 Posts: 26,797 Status: Offline |
Post #17
yeah i got them about 6 months ago________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
|
Posted 5th Nov 2014 at 14:34
|
|
|
pete-gti
Seasoned Pro Location: Kent Registered: 15 Feb 2009 Posts: 1,297 Status: Offline |
Post #18
How much where they? |
|
Posted 5th Nov 2014 at 14:40
|
|
|
rikky
Pikey Location: cheshire Registered: 28 Feb 2004 Posts: 26,797 Status: Offline |
Post #19
forget now but SB saysstud - 68p washer with nut - £1.60 ________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
|
Posted 5th Nov 2014 at 14:41
|
|
|
pete-gti
Seasoned Pro Location: Kent Registered: 15 Feb 2009 Posts: 1,297 Status: Offline |
Post #20
Will pop into dealer tomorow |
|
Posted 5th Nov 2014 at 19:09
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2025 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.