Post #1
Hi all, I'm after auxiliary belt tensioner, the full thing please with roller as the tensions seized solid but the rollers still spinning freely. Just put an idler pulley and belt on and discovered the problem. Thought I had enough tension in the belt but I'm getting a squeel on startup for a short period of time so it just can't quite be tight enough. Thanks Andy
|
displaying posts 1 to 4 of 4
| Author | Subject: aux belt tensioner |
 webby
Newbie  Location: hull Registered: 29 Mar 2014 Posts: 15 Status: Offline |
|
 Posted 28th Apr 2014 at 17:52
|
|
|
runaway813
Newbie  Location: Hull Registered: 06 May 2010 Posts: 16 Status: Offline |
Post #2
If it's the auto tensioner type from a car with Aircon i've got one - taken off a 1998 phase 2 as part of removing the aircon. Spring still works, roller runs OK. £10 ex postage? I'm in the hull area so could arrange collection/drop off depending on location to save postage? If interested drop me a PM. Cheers! Richard |
|
Posted 2nd May 2014 at 13:28
|
|
|
webby
Newbie Location: hull Registered: 29 Mar 2014 Posts: 15 Status: Offline |
Post #3
Got sorted now mate but thanks anyway, if you've anything else kicking about let me know, |
|
Posted 2nd May 2014 at 15:30
|
|
|
runaway813
Newbie Location: Hull Registered: 06 May 2010 Posts: 16 Status: Offline |
Post #4
Have most of the interior and seats, air con bits, shocks and springs - slowly adding to ebay and will list on here as well when time permits. Let me know if anything of interest. Cheers Richard |
|
Posted 2nd May 2014 at 18:41
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.