➜ advanced search
Add a more detailed reply Start a new thread in the Electrical forum
Home -> Forums -> Electrical -> mot pass : ) elec window fail :(

displaying posts 1 to 12 of 12

Author Subject: mot pass : ) elec window fail :(
jimmyhackers

Seasoned Pro

Location: birmingham

Registered: 14 Jun 2011

Posts: 1,149

Status: Offline
Post #1
i passed my mot (third time lucky)

anyways, garage man left driver window open. i wound it up and drove home, 4 mins into the journey i decided i want my windows open. both have stopped working. i mite of pressed up before i pressed down but i dont think itd be a burnt motor as both have stopped working

its not a fuse ive checked every single one :s, ive swapped over all my relays so i dont think its that (not sure which does elec windows and the relays i swapped over were from a crashed gti). i dont hear any clicking when i press the button.

can someone point out exactly where to look for this ellusive snapped wire in the drivers door loom with a pic or a good description. is it a wire in the door hing space just above that multiplug, or am i looking in my drivers door?, or am i looking under my dash?

help or pic greatly appreciated as always

jim

________________________________________

the world is changed by people in sheds
Posted 31st Jul 2013 at 20:27
Profile
scotzman

Seasoned Pro

Location: Dundee

Registered: 24 Jun 2011

Posts: 1,408

Status: Offline
Post #2
Door loom in the rubber grommet thing at the hinge.

________________________________________

'90 1.6 205 GTi, '98 306 GTi-6
Posted 31st Jul 2013 at 20:29
Profile
jimmyhackers

Seasoned Pro

Location: birmingham

Registered: 14 Jun 2011

Posts: 1,149

Status: Offline
Post #3
dont spose you know what colour wire to look for aswell?

________________________________________

the world is changed by people in sheds
Posted 31st Jul 2013 at 20:32
Profile
scotzman

Seasoned Pro

Location: Dundee

Registered: 24 Jun 2011

Posts: 1,408

Status: Offline
Post #4
On mine it was a heavier white wire and was broken right at the plug so was difficult to mend.

________________________________________

'90 1.6 205 GTi, '98 306 GTi-6
Posted 31st Jul 2013 at 20:34
Profile
tvrfan007

Seasoned Pro

Location: In the garage

Registered: 29 May 2005

Posts: 3,488

Status: Offline
Post #5
Does the pass window work from its own switch?

If your rear wiper isn't working it could well be the fuse.. check it for continuity not just visually - i chased my tail for a week for such an occurence.

________________________________________

I'm Si btw Tee hee

Night Blue VW Golf GTD
Bianca LBSC Rallye - Track/Road Slag Project Thread
Sparkling Silver Mini Cooper D - Super Dooper Superman - (The other half's wheels)
Posted 31st Jul 2013 at 20:37
Profile
scotzman

Seasoned Pro

Location: Dundee

Registered: 24 Jun 2011

Posts: 1,408

Status: Offline
Post #6
If the wire to the drivers switch is broken I don't think the passenger switch works either.

________________________________________

'90 1.6 205 GTi, '98 306 GTi-6
Posted 31st Jul 2013 at 20:41
Profile
stan_306gti6 Forum Admin

Location: Kent

Registered: 18 Jan 2004

Posts: 21,768

Status: Offline
Post #7
scotzman wrote:
If the wire to the drivers switch is broken I don't think the passenger switch works either.


Correct, once the driver's door loom is broken it cuts the power going to the passenger door as the two seem to run in series. Yes

________________________________________

"Supercharged - 454.1bhp/317.5lb/ft"
Peugeot 306 GTi-6
2000 (X), Moonstone Love
Posted 31st Jul 2013 at 22:34
Profile
jimmyhackers

Seasoned Pro

Location: birmingham

Registered: 14 Jun 2011

Posts: 1,149

Status: Offline
Post #8
ill have a gander at it tommorrow. just out of interest if i cant fix it with a soldering iron. how intensive of a job is the wiring loom replacement?

do i need the dash out or.. the instrument panel.. etc etc
does it plug in or will i need to cut and solder it in places?
how far/deep will the new loom wires go from the point of entry to the car?

thanks again

jim

p.s. if i dont find a broken wire could it just be the switch thats gone??

________________________________________

the world is changed by people in sheds
Posted 1st Aug 2013 at 00:51
Profile
stan_306gti6 Forum Admin

Location: Kent

Registered: 18 Jan 2004

Posts: 21,768

Status: Offline
Post #9
There will be a broken wire. Yes

As for changing the loom, I've never actually done it but from others say about it, it's a fairly simple job with no dash removal etc. Smile

________________________________________

"Supercharged - 454.1bhp/317.5lb/ft"
Peugeot 306 GTi-6
2000 (X), Moonstone Love
Posted 1st Aug 2013 at 09:01
Profile
mik

Seasoned Pro

Location: Kent

Registered: 17 Feb 2011

Posts: 2,100

Status: Offline
Post #10
ISTR seeing an FAQ on it somewhere, if it hasn't auto-deleted.

EDIT:

http://www.306gti6.com/forum/showthread.php?id=121814

http://www.306gti6.com/forum/showthread.php?id=115446&page=1

http://www.306gti6.com/forum/showthread.php?id=50366

http://www.306gti6.com/forum/showthread.php?id=113098

________________________________________

Cherry Rallye SOLD

Posted 1st Aug 2013 at 09:54
Profile
jimmyhackers

Seasoned Pro

Location: birmingham

Registered: 14 Jun 2011

Posts: 1,149

Status: Offline
Post #11
thanks for the info,

sorted it myself this morning, wasnt a broken wire! thank god

was just the pins in the door loom plug beign all greeny corroded, 10 mins with a bit of grit paper and it was sorted.

________________________________________

the world is changed by people in sheds
Posted 1st Aug 2013 at 13:44
Profile
buzzbrightyear

Seasoned Pro

Location: hiding all receipts for car

Registered: 09 Jul 2008

Posts: 11,901

Status: Offline
Post #12
tvrfan007 wrote:
Does the pass window work from its own switch?

If your rear wiper isn't working it could well be the fuse.. check it for continuity not just visually - i chased my tail for a week for such an occurence.

I did the same

________________________________________

andrew315rawson@live.co.uk
Moonstone phase 7 gti6
My Project thread: http://www.306gti6.com/forum/showthread.php?id=119992&page=1
Posted 8th Aug 2013 at 13:32
Profile
Home -> Forums -> Electrical -> mot pass : ) elec window fail :(

All times are GMT. The time is now 03:57

The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.