Post #1
I'm after a 88mm diesel crankshaft in good condition for a 2.1L build
|
displaying posts 1 to 6 of 6
| Author | Subject: Crankshaft 2.1 build |
 elpatron
Junior User  Location: Switzerland Registered: 21 Aug 2012 Posts: 78 Status: Offline |
|
 Posted 6th Aug 2013 at 22:23
|
|
|
elpatron
Junior User Location: Switzerland Registered: 21 Aug 2012 Posts: 78 Status: Offline |
Post #2
BUMP |
|
Posted 31st Jul 2013 at 19:15
|
|
|
elpatron
Junior User Location: Switzerland Registered: 21 Aug 2012 Posts: 78 Status: Offline |
Post #3
bump |
|
Posted 3rd Aug 2013 at 18:07
|
|
|
elpatron
Junior User Location: Switzerland Registered: 21 Aug 2012 Posts: 78 Status: Offline |
Post #4
BUMPY |
|
Posted 6th Aug 2013 at 22:23
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,866 Status: Offline |
Post #5
Surely there are 1.9 xu's and xud's in swiss?________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 6th Aug 2013 at 22:39
|
|
|
elpatron
Junior User Location: Switzerland Registered: 21 Aug 2012 Posts: 78 Status: Offline |
Post #6
yes there are but sourcing one is not that easy as there are mostly no separate cranks only complete engines |
|
Posted 7th Aug 2013 at 00:02
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2026 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy. (NEW HOST)