Post #1
Anything you have thats track related parts you have, pm me.
|
displaying posts 1 to 8 of 8
| Author | Subject: Track Car Bits |
 drewhughes
Regular  Location: Coalville Registered: 20 Jun 2013 Posts: 130 Status: Offline |
|
 Posted 21st Jul 2013 at 18:29
|
|
|
midlife
Seasoned Pro  Location: Colne, Lancashire Registered: 13 Mar 2006 Posts: 7,544 Status: Offline |
Post #2
http://www.306gti6.com/forum/showthread.php?id=156381&page=last  ________________________________________ Get used to seeing the yellow one !!! Team 330™ Team "no front end or engine" Team "LIMITED EDITION" I live for the 306 sticker  Team 0-60 in 6.44 & standing qtr in 14.808 @ 94.55mph all with std engine 203bhp Corolla T-Sport daily driver stealthier than Kwai Chang Caine |
|
Posted 21st Jul 2013 at 19:25
|
|
|
bigbadbowen
Seasoned Pro  Location: Winchester Registered: 21 Nov 2003 Posts: 13,753 Status: Offline |
Post #3
What you after ? Or are you after everything ? |
|
Posted 21st Jul 2013 at 19:27
|
|
|
drewhughes
Regular Location: Coalville Registered: 20 Jun 2013 Posts: 130 Status: Offline |
Post #4
Seen that thread there mate thanks.Some of the stuff I dont want or fit in etc, like the suspension i want a matching set bigbadbowen wrote: What you after ? Or are you after everything ? Coilovers, seats, harnesses etc are the probably the first things. Plan on using the car and improving it as i go a long, so I need the basics/safety things first. But I am open obviously to other parts for the future, im basically gathering parts |
|
Posted 21st Jul 2013 at 19:33
|
|
|
pete_rallye
Seasoned Pro  Location: Yorkshire Registered: 12 Dec 2002 Posts: 5,253 Status: Offline |
Post #5
I have Sparco Pro 2000 seats x2 and 2 sets of TRS harnesses in date for competition use, not sure what you mean by a matching set of suspension? Care to elaborate? The stuff I have is about as matched as you will get given it was designed by Peugeot and Bilstein for the Group A rally cars... Complete front end and complete rear beam will give you one of the best handling 306's on the forum in one go, not cheap mind!________________________________________ Oulton Park in a BTCC 306 vid 1Oulton Park in a BTCC 306 vid 2 Lap of the 'ring |
|
Posted 21st Jul 2013 at 21:54
|
|
|
drewhughes
Regular Location: Coalville Registered: 20 Jun 2013 Posts: 130 Status: Offline |
Post #6
pete_rallye wrote: I have Sparco Pro 2000 seats x2 and 2 sets of TRS harnesses in date for competition use, not sure what you mean by a matching set of suspension? Care to elaborate? The stuff I have is about as matched as you will get given it was designed by Peugeot and Bilstein for the Group A rally cars... Complete front end and complete rear beam will give you one of the best handling 306's on the forum in one go, not cheap mind! Oh sorry Pete, just gone back and read it properly, i only saw this first time round PTS Bilstein rear shocks- £120 pair didn't realise it was the whole subframe etc as well you listed. Id love to take that off your hands, but its a bit rich for me tbh seeing as im building a budget car. The Pro 2000's i no longer fit in. And what colour are the harnesses? |
|
Posted 21st Jul 2013 at 22:01
|
|
|
pete_rallye
Seasoned Pro Location: Yorkshire Registered: 12 Dec 2002 Posts: 5,253 Status: Offline |
Post #7
Harnesses are black, I think one is 6 point, one is 5 point, but will double check that. ________________________________________ Oulton Park in a BTCC 306 vid 1Oulton Park in a BTCC 306 vid 2 Lap of the 'ring |
|
Posted 21st Jul 2013 at 22:07
|
|
|
drewhughes
Regular Location: Coalville Registered: 20 Jun 2013 Posts: 130 Status: Offline |
Post #8
Ah ok, right colour but only really wanted 4 point.Cheers anyway |
|
Posted 21st Jul 2013 at 22:10
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.