Post #1
My Oil pressure gauge does very little in the way of moving !
Has anyone got a working sender unit that I can have/borrow/buy ?
Also, does anyone have any manual mirrors spare ?
Polycarb windows ?
Lightweight 15" rims ?
Paul
|
displaying posts 1 to 9 of 9
| Author | Subject: 306GTi6 Phase 1 Oil pressure sender/sensor |
 BigTallPaul
Junior User  Location: Leicester Registered: 02 Jun 2013 Posts: 90 Status: Offline |
My Oil pressure gauge does very little in the way of moving ! Has anyone got a working sender unit that I can have/borrow/buy ? Also, does anyone have any manual mirrors spare ? Polycarb windows ? Lightweight 15" rims ? Paul |
 Posted 17th Jun 2013 at 18:28
|
|
|
jonnie205
Seasoned Pro  Location: Bicester Registered: 10 Apr 2005 Posts: 4,146 Status: Offline |
Post #2
Oil gauge £25Mirrors £10 each |
|
Posted 17th Jun 2013 at 18:35
|
|
|
BigTallPaul
Junior User Location: Leicester Registered: 02 Jun 2013 Posts: 90 Status: Offline |
Post #3
jonnie205 wrote: Oil gauge £25 Mirrors £10 each Hi Jonnie, Thanks for the prompt response. Is that the Oil gauge or the Sender unit ? I'm guessing its the sender unit (from engine block) that I need. Paul |
|
Posted 17th Jun 2013 at 19:48
|
|
|
jonnie205
Seasoned Pro Location: Bicester Registered: 10 Apr 2005 Posts: 4,146 Status: Offline |
Post #4
Phase 1 pressure sender |
|
Posted 17th Jun 2013 at 21:07
|
|
|
24seven
Seasoned Pro  Location: Derby Registered: 05 Oct 2005 Posts: 6,221 Status: Offline |
Post #5
I also have one, pictured here with an adapter for a 205/309. £25 posted (click)  ________________________________________ Ph1 306 GTi 6 | RX8 231 S1 | YBR 125 Cafe Racer | MT-03 660 |
|
Posted 18th Jun 2013 at 14:26
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,838 Status: Offline |
Post #6
what's that off guy? sure aint an XU10 pug, they have a two slot jpt type connection.________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 18th Jun 2013 at 15:03
|
|
|
24seven
Seasoned Pro Location: Derby Registered: 05 Oct 2005 Posts: 6,221 Status: Offline |
Post #7
It was sold to me as a sensor & adapter to use the oil pressure gauge with an RFS engine in a 205/309. The other side of that adapter has another threaded hole, which if I'd been smart I'd have included in the picture in the first place!   ________________________________________ Ph1 306 GTi 6 | RX8 231 S1 | YBR 125 Cafe Racer | MT-03 660 |
|
Posted 18th Jun 2013 at 17:19
|
|
|
BigTallPaul
Junior User Location: Leicester Registered: 02 Jun 2013 Posts: 90 Status: Offline |
Post #8
Thanks for the offer and images, but I've already promised to visit Jonnie205 tomorrow and spent some hard earned cash with him. To be honest that looks just like the Oil pressure switch (not sender). The switch operates the low Oil pressure warning light (I think) rather than the Oil Pressure gauge. Thanks again though. Paul |
|
Posted 18th Jun 2013 at 17:36
|
|
|
miles
Seasoned Pro  Location: Ringwood Registered: 28 Dec 2002 Posts: 3,433 Status: Offline |
Post #9
Thats just a low warning light sender, No pressure sender, The idea is to use a 205 sender which uses a smaller thread over the M16 as used on the Iron blocks________________________________________ 306 Rallye Sptint/Race Car, 205 CTI 1.9 8v to name a fewRoad, Track and Race/Rally car preparation to your personal requirements, Full Workshop & Diagnostic Facilities New and Second parts, from Plugs to Turbo's We now also carry out Routine Servicing www.pugracing.com & FB Page, https://www.facebook.com/PugRacing Ebay; http://stores.ebay.co.uk/Pug-Racing-Shop 2012/2013/2014/2019 Class Winners at Gurston Down Speed Hillclimb & Joint overall, Class record too along the way, |
|
Posted 18th Jun 2013 at 23:23
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.