Author	Subject: Clutch bite point.
samavery05 Junior User Location: southampton Registered: 19 Feb 2012 Posts: 83 Status: Offline	Post #1 So I have a 6 and the bite is dead low almost touching the floor, I was wondering is there a way to raise the bite point? It's starting to annoy me!!! And thoughts? ________________________________________ GTI-6.........Gold.
Posted 2nd Apr 2013 at 18:38 Profile

coskev Seasoned Pro Location: Oswestry Registered: 01 Nov 2009 Posts: 3,132 Status: Offline	Post #2 Is the clutch heavy? Try a new cable is the cheapest and easiest But more than likely it will need a clutch, unless there is history saying its been changed? ________________________________________ Red GTB1756 powered Fabia VRS daily driver,LBSC Gti6 eater........ Mac1 ZR R1 kit car build in progress.
Posted 2nd Apr 2013 at 18:41 Profile

samavery05 Junior User Location: southampton Registered: 19 Feb 2012 Posts: 83 Status: Offline	Post #3 From what I have gathered, it has been replaced a mear 5000 ago, usually if I clutch wears out it gets higher and higher? And no it's not heavy at all! ________________________________________ GTI-6.........Gold.
Posted 2nd Apr 2013 at 18:44 Profile

stan_306gti6 Forum Admin Location: Kent Registered: 18 Jan 2004 Posts: 21,769 Status: Offline	Post #4 Sounds like the auto-adjuster in the cable has seized up. New cable, and your clutch will be like a dream. ________________________________________ "Supercharged - 454.1bhp/317.5lb/ft" Peugeot 306 GTi-6 2000 (X), Moonstone
Posted 2nd Apr 2013 at 18:53 Profile

samavery05 Junior User Location: southampton Registered: 19 Feb 2012 Posts: 83 Status: Offline	Post #5 Thanks. Ill be on that tomorrow! ________________________________________ GTI-6.........Gold.
Posted 2nd Apr 2013 at 18:55 Profile

coskev Seasoned Pro Location: Oswestry Registered: 01 Nov 2009 Posts: 3,132 Status: Offline	Post #6 As above They should really have fitted a new cable with the new clutch but some people don't do a proper job ________________________________________ Red GTB1756 powered Fabia VRS daily driver,LBSC Gti6 eater........ Mac1 ZR R1 kit car build in progress.
Posted 2nd Apr 2013 at 18:56 Profile

dr-evil Senior User Location: Crewe Registered: 20 Oct 2006 Posts: 901 Status: Offline	Post #7 Have mega low bite point on both the rallye and the six (low mileage clutches in both) both have had new oe clutch cables. Rallye's was so low couldn't use a floor mat in it !! ________________________________________ Cad Monkey will work for chocolate biscuits....I'm not kidding
Posted 23rd Apr 2013 at 17:14 Profile

The Peugeot GTi-6 & Rallye Owners Club - ©2026 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy. (NEW HOST)