|
displaying posts 1 to 24 of 24
Author | Subject: what number should be stamped on a gti6 block is it 4rs??? |
Moonstone6
Regular Location: Lichfield Registered: 11 Apr 2012 Posts: 268 Status: Offline |
Post #1
just collected an engine (in the dark) supposedly gti6 but im unsure as it has no cam covers so worried in case its an xsi and also the exhaust manifold is identical to a 6 one i.e tubular but does not have the 2 lugs for tightning it up to the cat ???? i will try and post a picture its the only one i have as of yet as its dumped in my garage https://lh4.googleusercontent.com/-Irq9LR_foOQ/UMulC_uFsOI/AAAAAAAAA3E/CzS-4_y86zY/s912/FB_IMG_1355513946773406.jpg |
Posted 14th Dec 2012 at 22:16
|
Moonstone6
Regular Location: Lichfield Registered: 11 Apr 2012 Posts: 268 Status: Offline |
Post #2
it is a s**te picture sorry fellas |
Posted 14th Dec 2012 at 22:17
|
mechanical_repairs
Seasoned Pro Location: leicester Registered: 10 Jan 2005 Posts: 12,122 Status: Offline |
Post #3
That has to be the worst pic ever. Carl ________________________________________ C.G.Cars of Leicester, Peugeot/Citroen/Renault specialist Tel: 01162 624498/07799 405184 WWW.CGCARSLEICESTER.CO.UK36 narborough road south, Leicester LE3 2fn MOT station now open, tests £35 with a free retest. Recovery available with a recovery unit, for those not so local jobs Also offer the loan of a free courtesy car 306 dturbo |
Posted 14th Dec 2012 at 22:26
|
Moonstone6
Regular Location: Lichfield Registered: 11 Apr 2012 Posts: 268 Status: Offline |
Post #4
mechanical_repairs wrote: hang on im onnit il post the link That has to be the worst pic ever. Carl |
Posted 14th Dec 2012 at 22:27
|
Moonstone6
Regular Location: Lichfield Registered: 11 Apr 2012 Posts: 268 Status: Offline |
Post #5
http://www.ebay.co.uk/itm/170950310479?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649Moonstone6 wrote: mechanical_repairs wrote: hang on im onnit il post the link That has to be the worst pic ever. Carl |
Posted 14th Dec 2012 at 22:28
|
bigbadbowen
Seasoned Pro Location: Winchester Registered: 21 Nov 2003 Posts: 13,753 Status: Offline |
Post #6
Does the head have a cam sensor init ? Are there separate coil packs ? It should have RFS written on it I think ? |
Posted 14th Dec 2012 at 22:28
|
Moonstone6
Regular Location: Lichfield Registered: 11 Apr 2012 Posts: 268 Status: Offline |
Post #7
bigbadbowen wrote: Does the head have a cam sensor init ? Are there separate coil packs ? It should have RFS written on it I think ? yea mate 4 individual sagem coil packs and a little plug on the head near cam pulley ? |
Posted 14th Dec 2012 at 22:30
|
simonjames
Seasoned Pro Location: Whitland S.Wales Registered: 23 Nov 2004 Posts: 6,219 Status: Offline |
Post #8
its a 6 head then ________________________________________ All South Wales Members Click HereTeam Supercharged Black RALLYE ™ (Click Here for Build Project) MY EBAY ITEMS 07943066306 |
Posted 14th Dec 2012 at 22:43
|
Moonstone6
Regular Location: Lichfield Registered: 11 Apr 2012 Posts: 268 Status: Offline |
Post #9
simonjames wrote: cool can you see the manifold in the ebay link i posted its a 6 head then |
Posted 14th Dec 2012 at 22:46
|
simonjames
Seasoned Pro Location: Whitland S.Wales Registered: 23 Nov 2004 Posts: 6,219 Status: Offline |
Post #10
not opened any links, if it has 4 coil packs its a 6 head xsi head cant take 4 coils it only has 1 coil pack ________________________________________ All South Wales Members Click HereTeam Supercharged Black RALLYE ™ (Click Here for Build Project) MY EBAY ITEMS 07943066306 |
Posted 14th Dec 2012 at 22:51
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,839 Status: Offline |
Post #11
Xsara vts engine________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
Posted 14th Dec 2012 at 22:55
|
Moonstone6
Regular Location: Lichfield Registered: 11 Apr 2012 Posts: 268 Status: Offline |
Post #12
welshpug! wrote: cheers matey you always come to the rescue dude Xsara vts engine |
Posted 14th Dec 2012 at 23:05
|
Moonstone6
Regular Location: Lichfield Registered: 11 Apr 2012 Posts: 268 Status: Offline |
Post #13
ouch |
Posted 15th Dec 2012 at 16:53
|
Moonstone6
Regular Location: Lichfield Registered: 11 Apr 2012 Posts: 268 Status: Offline |
Post #14
here is that manifold aswell ?????? |
Posted 15th Dec 2012 at 16:57
|
Moonstone6
Regular Location: Lichfield Registered: 11 Apr 2012 Posts: 268 Status: Offline |
Post #15
|
Posted 15th Dec 2012 at 16:58
|
Niall
Seasoned Pro Location: Epsom Registered: 06 Jun 2012 Posts: 1,941 Status: Offline |
Post #16
Its a gti engine but looks fooked. Id be getting a refund straight away! Also, that manifold has been messed with. No use to anyone! |
Posted 15th Dec 2012 at 17:23
|
Moonstone6
Regular Location: Lichfield Registered: 11 Apr 2012 Posts: 268 Status: Offline |
Post #17
Niall wrote: I know I just don't get it with the manifoldn n as there's no signs of cutting lugs off or anything and you can see where a clamp has been used to tighten it to cat pipe Its a gti engine but looks fooked. Id be getting a refund straight away! Also, that manifold has been messed with. No use to anyone! I paid £50 for the lot head alternator coil packs pas pump head complete so still not to bad |
Posted 15th Dec 2012 at 17:40
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,839 Status: Offline |
Post #18
as I said, its a xsara engine, phase2 on have a different V-band style clamp, nothing has been cut off.________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
Posted 15th Dec 2012 at 18:32
|
Moonstone6
Regular Location: Lichfield Registered: 11 Apr 2012 Posts: 268 Status: Offline |
Post #19
welshpug! wrote: top bloke I can try n sell it on eBay now as I said, its a xsara engine, phase2 on have a different V-band style clamp, nothing has been cut off. |
Posted 15th Dec 2012 at 18:35
|
rich306
Seasoned Pro Location: Portsmouth Registered: 09 Aug 2009 Posts: 1,834 Status: Offline |
Post #20
Moonstone6 wrote: welshpug! wrote: top bloke I can try n sell it on eBay now as I said, its a xsara engine, phase2 on have a different V-band style clamp, nothing has been cut off. Don't sell it, see what you can salvage from the engine and scrap the block. ________________________________________ Richies Project RallyeElectrical work carried out in Portsmouth jamiek_uk2000 wrote: - Top Tip!!! You'll need to throw money at the car. Not on parts. Just stand near your car and throw loose change at it, I find this increases performance for a short period of time |
Posted 16th Dec 2012 at 10:02
|
jonnie205
Seasoned Pro Location: Bicester Registered: 10 Apr 2005 Posts: 4,146 Status: Offline |
Post #21
yeah phase 2 VTS manifold, its worth £50 just keep whats good |
Posted 16th Dec 2012 at 10:12
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,839 Status: Offline |
Post #22
Find a low mileage XU10J4R block (aka XSI) stick it all in there.________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
Posted 16th Dec 2012 at 10:22
|
Moonstone6
Regular Location: Lichfield Registered: 11 Apr 2012 Posts: 268 Status: Offline |
Post #23
welshpug! wrote: ahhh didn't know it was all the same as the xsi il have a look cheers mate Find a low mileage XU10J4R block (aka XSI) stick it all in there. |
Posted 16th Dec 2012 at 10:28
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,839 Status: Offline |
Post #24
its not 100% the same, but near enough.________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
Posted 16th Dec 2012 at 10:36
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.