|
displaying posts 1 to 6 of 6
| Author | Subject: Gear stick woes |
 jägertom
Newbie  Location: Throwing parts at a hungry Pug Registered: 10 Mar 2010 Posts: 43 Status: Offline |
Post #1
Mornin all, does anyone know where i can source a new gearstick? Snapped mine just above the balljoint leaving me stationary whilst in traffic in the fast lane of the M25, cue police, highways agency and the RAC. Ahh, the joys of french car ownership!  Have run a search on here with no avail, lots of threads about popping linkages but no sticks. Any help much appreciated. as always.  ________________________________________ Feelin so fly like a Gti6 Team >160,000mi  |
 Posted 24th Jun 2012 at 11:53
|
|
|
owain
Seasoned Pro  Location: Essex Registered: 20 May 2009 Posts: 9,185 Status: Offline |
Post #2
Just take a look for anyone breaking a car in the Parts For Sale section and ask them, it's not something people normally list as there's no demand, but I'm pretty sure every 306 had one, so you should be able to pick one up for no money  ________________________________________ Membership expiring soon, get in contact on our new little forum project. |
|
Posted 25th Jun 2012 at 07:51
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,838 Status: Offline |
Post #3
would imagine a 5speed stick would be easy to adapt for 6sp use________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 25th Jun 2012 at 08:46
|
|
|
adam b
Seasoned Pro  Location: The Nam Registered: 24 Jan 2006 Posts: 12,828 Status: Offline |
Post #4
Meantime use a large screwdriver into the balljoint. Easy enough, although the shift is a tad sloppy. Reverse is also a bit of a fiddle.Its the s**t archiving on the forum because I had a thread on it about 5 year ago.  Mine snapped in traffic at some lights in rush hour. Pushed it out the way and used a screwdriver from the glovebox. ________________________________________ Nothing to see here |
|
Posted 25th Jun 2012 at 09:47
|
|
|
jägertom
Newbie Location: Throwing parts at a hungry Pug Registered: 10 Mar 2010 Posts: 43 Status: Offline |
Post #5
Yeah I'm using a bit of iron bar I found on the hard shoulder at the mo. Might just turn down a big old screwdriver and use that instead for the crack. Cheers guys________________________________________ Feelin so fly like a Gti6Team >160,000mi |
|
Posted 25th Jun 2012 at 17:23
|
|
|
russbez
Seasoned Pro  Location: Inverness-Shire Registered: 19 Dec 2005 Posts: 7,459 Status: Offline |
Post #6
lol mine snapped a few years agome and a friend made an xsi one fit, iirc we might of used jublie clip for reverse cable also shortened my stick by 30mm too  cant remember if we had exhaust/cat/decat off ________________________________________ TEAM HIGH BOOST SUPERCHARGED RALLYEMy Rallye project thread |
|
Posted 29th Jun 2012 at 08:42
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.