i know its a 306 forum and ive put this up on drivers too, but you actually get answers on here!

On my 205 rallye ive got gti running gear which also includes the front anti roll bar. ive never been overly happy with the brake pipe routing on my car for the last few years and ive now worked out why.

the base model and rallyes with no front arb have a mounting point between the copper pipe and flexi like this




and the gti's with a front arb have a mounting point like this



so ive got the top mounting point but have got the bottom pipe routing so it doesnt rub against the arb.

my thoughts are to either grind off the pointing point and reweld it into position of the gti one or poss get a different type of fitting on the end of my braided flexi to overcome the issue.


Has anyone else had this problem, if so what did you do??

thanks

________________________________________

230 hp 2.1 16v XU 205 rallye on jenveys Project thread here
309 3dr K20 Type R

I would cut and weld, I think that's rather close to the droplink tab.

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.