________________________________________
Beef Beyond Belief
|
displaying posts 1 to 6 of 6
Author | Subject: coolant bleed point |
hsustyle
Seasoned Pro Location: High Hurstwood Registered: 08 Nov 2011 Posts: 1,037 Status: Offline |
Post #1
1999 Rallye. I can only see two bleed point not three. One on thermostat housing and one top of radiator. I thought there is one near the back of the engine block too? I've looked through the FAQ section and there isn't much there. Thanks________________________________________ Beef Beyond Belief |
Posted 23rd Jan 2012 at 10:57
|
mrdeey
Regular Location: nearerthanuthink Registered: 14 Feb 2011 Posts: 200 Status: Offline |
Post #2
there is another on the bulkhead , under the bonnet on the left as you face the car , its on the heater hose , careful you dont break it off!________________________________________ now new booted , boosted and flying again! |
Posted 23rd Jan 2012 at 11:02
|
hsustyle
Seasoned Pro Location: High Hurstwood Registered: 08 Nov 2011 Posts: 1,037 Status: Offline |
Post #3
Cheers dude.________________________________________ Beef Beyond Belief |
Posted 23rd Jan 2012 at 11:13
|
coskev
Seasoned Pro Location: Oswestry Registered: 01 Nov 2009 Posts: 3,132 Status: Offline |
Post #4
I find holding the revs up slightly helps bleed the system ________________________________________ Red GTB1756 powered Fabia VRS daily driver,LBSC Gti6 eater........Mac1 ZR R1 kit car build in progress. |
Posted 23rd Jan 2012 at 22:58
|
heidi6
Regular Location: Cornwall Registered: 30 Nov 2011 Posts: 409 Status: Offline |
Post #5
coskev wrote: I find holding the revs up slightly helps bleed the system This ________________________________________ IPhase 3 Astor. Built on Wednesday, 12th April 2000 in France. Years of 'Creative Maintenance' mean this car is now much lighter and slightly more 'race' specced... |
Posted 23rd Jan 2012 at 23:02
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,838 Status: Offline |
Post #6
drill a 3mm hole in the top edge of the stat just in from the seal, helps bleeding massively.________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
Posted 24th Jan 2012 at 10:25
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.