Post #1
Hi, will phase 3 crystals fit a phase 2 ? Any help would be great cheers sim ________________________________________
Happy to be back in a 306 again!
|
displaying posts 1 to 7 of 7
| Author | Subject: Phase 3 lights |
 simbob
Regular  Location: cinderford Registered: 18 Feb 2010 Posts: 337 Status: Offline |
|
 Posted 18th Oct 2011 at 20:17
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,871 Status: Offline |
Post #2
yup________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 18th Oct 2011 at 20:35
|
|
|
scotzman
Seasoned Pro  Location: Dundee Registered: 24 Jun 2011 Posts: 1,408 Status: Offline |
Post #3
you'll have to change the levelling motors over though.________________________________________ '90 1.6 205 GTi, '98 306 GTi-6 |
|
Posted 18th Oct 2011 at 20:41
|
|
|
7057sam
Seasoned Pro  Location: Stowmarket,Suffolk Registered: 18 Apr 2009 Posts: 2,080 Status: Offline |
Post #4
scotzman wrote: you'll have to change the levelling motors over though. I did'nt,just used the ones on they allready,before you start wd40 the shit out of the top hecks bolt,as mine have always been rusted.Also if you snap a hokney clip its a pain in the arse. All in all nice easy job 20min max  ________________________________________ Rallye build: 11 November 1998 - a WednesdayTeam rallye,built for track ----Click this if you like rallyes Rallye dead  Secret Team Astor... |
|
Posted 18th Oct 2011 at 21:57
|
|
|
simbob
Regular Location: cinderford Registered: 18 Feb 2010 Posts: 337 Status: Offline |
Post #5
Anyone got any going cheap ???________________________________________ Happy to be back in a 306 again! |
|
Posted 18th Oct 2011 at 22:31
|
|
|
richy5118
Newbie Location: rotherham Registered: 28 Oct 2011 Posts: 11 Status: Offline |
Post #6
they look well i got them in mine ________________________________________ possible the tidyest 306 gti6 for its year |
|
Posted 1st Nov 2011 at 21:01
|
|
|
scotzman
Seasoned Pro Location: Dundee Registered: 24 Jun 2011 Posts: 1,408 Status: Offline |
Post #7
7057sam wrote: scotzman wrote: you'll have to change the levelling motors over though. I did'nt,just used the ones on they allready,before you start wd40 the shit out of the top hecks bolt,as mine have always been rusted.Also if you snap a hokney clip its a pain in the arse. All in all nice easy job 20min max Mine had different plugs, only take seconds to change over though, you're right about the wd40, i snapped one when i did mine. ________________________________________ '90 1.6 205 GTi, '98 306 GTi-6 |
|
Posted 1st Nov 2011 at 21:06
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2026 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy. (NEW HOST)