Author	Subject: My front lowering options
marcello Junior User Location: Sydney Registered: 23 Jun 2011 Posts: 61 Status: Offline	Post #1 Hello peeps due to the lack of parts in australia im going to have to import my front springs, so ebay is the answer lol these are the two options im looking towards i want to go atlest 50-60mm Option 1 - GMAX 60mm Option 2 - VENTURA 50mm if anybody else could suggest something suitable and and good please advise Thankyou!
Posted 8th Sep 2011 at 03:00 Profile

owain Seasoned Pro Location: Essex Registered: 20 May 2009 Posts: 9,185 Status: Offline	Post #2 Allow me to be the first to say this - "that's too big a drop and you'll ruin your handling". Ah, good to get that out the way nice and early. ________________________________________ Membership expiring soon, get in contact on our new little forum project.
Posted 8th Sep 2011 at 08:14 Profile

marcello Junior User Location: Sydney Registered: 23 Jun 2011 Posts: 61 Status: Offline	Post #3 lol i know i know , im putting 17"s on it anyways so my handling is gone pior to putting springs in
Posted 8th Sep 2011 at 08:28 Profile

mark.evs Senior User Location: Near Bridgend Registered: 21 Dec 2010 Posts: 527 Status: Offline

Post #4 I have 17's on my Dt, front is dropped 30-mm on ROC springs (e-bay for about £55 iirc),rear is standard height and the set up is pretty good. the gap in the arches looks spot on front and rear. I've used G-max before and under hard braking they drop too far and the bumper scrapes the floor, wouldnt use them again. ________________________________________ My GTi6 track project White Rallye project

Posted 8th Sep 2011 at 09:50 Profile

The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.