A rear beam mount is on the way out on my rallye
One side has been replaced but the other has been knocking a little
I've got a phase 3 beam that's ha all the mounts changed, the problem is they are different
The rallye has the compensator, but this beam doesn't.
Will it be fine to swap it without the compensator?

Thanks in advance

________________________________________

Cherry rallye - DOB Thursday 29/04/1999
Team Rallye - the leaner, meaner, better looking sister of the GTI6

The best engine in the world is the vagina, it takes any size piston, its self lubricating, starts with 1 finger, and every 4 weeks does its own oil change. It's just a pity the management system is so fecking temperamental. 

Ayup WP
Would it be ok without it?
I'm assuming that there's no difference in the beams other than the compensator and if the phase 2 braking system is the same as phase 3 bar the compensator then i will just go with that as is
The compensators tend to seize over time anyway

________________________________________

Cherry rallye - DOB Thursday 29/04/1999
Team Rallye - the leaner, meaner, better looking sister of the GTI6

The best engine in the world is the vagina, it takes any size piston, its self lubricating, starts with 1 finger, and every 4 weeks does its own oil change. It's just a pity the management system is so fecking temperamental. 

Your right kev, abs unit is different

I aint touched the Vts beam yet (been to busy with the shedrallye) you can take the whole thing for the price if the torsion bars if you want to?
It will have no shocks or calipers though

________________________________________

Cherry rallye - DOB Thursday 29/04/1999
Team Rallye - the leaner, meaner, better looking sister of the GTI6

The best engine in the world is the vagina, it takes any size piston, its self lubricating, starts with 1 finger, and every 4 weeks does its own oil change. It's just a pity the management system is so fecking temperamental.