|
displaying posts 1 to 4 of 4
| Author | Subject: REAR BEAM CHANGE DRUM TO DISC |
 bev 306
Newbie  Location: ryde Registered: 07 Jun 2011 Posts: 3 Status: Offline |
Post #1
Hello everyone i have a 306 phase 1 that has a drum rear beam and its nakerd and needs to be replaced.I would replace it with one the same but i can only source one with discs and ive been told that the stub axle is too short, is this true and if so how would it affect the car. ive also sourced the new handbrake cables and am aware you can use existing brake hoses. |
 Posted 7th Jun 2011 at 19:12
|
|
|
306weasel
Regular  Location: Whitburn Registered: 09 Aug 2005 Posts: 232 Status: Offline |
Post #2
It's a straightforward swap provided you use handbrake cables for a disc brake axle. You would possibly only have issues if you were attempting to convert the new disc beam back to drums.________________________________________ Car#1 306 HDi Meridian 5door, 133Bhp, 225lb.ft Ecosse R/R 20/3/05Car#2 306 1.4 3door track car with Gti6 power. 167Bhp, 134lb.ft Ecosse R/R 21/10/07 Car#3 Grand Scenic 1.9DCi (Expanding!) family mover. |
|
Posted 7th Jun 2011 at 19:59
|
|
|
bev 306
Newbie Location: ryde Registered: 07 Jun 2011 Posts: 3 Status: Offline |
Post #3
okay thanks a lot |
|
Posted 7th Jun 2011 at 23:16
|
|
|
bev 306
Newbie Location: ryde Registered: 07 Jun 2011 Posts: 3 Status: Offline |
Post #4
just got phase 3 xsi beam for my 306 anybody know what the part number would be for the handbreak cables? fitting the beam friday hope it fits! |
|
Posted 8th Jun 2011 at 19:55
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.