|
displaying posts 1 to 3 of 3
| Author | Subject: O/S hub (18mm balljoint) for a 1.6 XS |
 andy-goodwin
Regular  Location: Waterlooville Registered: 09 Apr 2007 Posts: 228 Status: Offline |
Post #1
I'm confused easily, so need some advice.I have a completely wrecked hub (snapped around the balljoint. Oh yeah!) and know it's an 18mm balljoint, but, seeing as it's a 1.6 litre rather than the meaty 6, I'm assuming the hubs are different in terms of splines for the drive shafts? Also, where's the best place to source a new (or used but working) hub from without talking rapey money? Cheers |
 Posted 19th Mar 2011 at 00:43
|
|
Rich E
Forum Admin Location: Hertfordshire Registered: 27 Apr 2005 Posts: 7,757 Status: Offline |
Post #2
If your car has ABS it will have the same hubs as the '6.eBay / breaker / for sale section for a replacement. ________________________________________ Rich |
|
Posted 19th Mar 2011 at 00:56
|
|
|
andy-goodwin
Regular Location: Waterlooville Registered: 09 Apr 2007 Posts: 228 Status: Offline |
Post #3
That's the best news I've had all day  Thanks Rich! |
|
Posted 19th Mar 2011 at 02:19
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.