Author	Subject: phase 2/3 seat squab on Phase 1 seat
martinj Regular Location: Berkshire Registered: 12 Feb 2007 Posts: 322 Status: Offline	Post #1 Hi, Does anyone know if it is possible to fit a phase 2/3 seat base into a phase 1 seat, and whether there is any difference in the shaping of the seat base? Martin ________________________________________ - Maxi rear axle hub spacers +53mm per side - Maxi front steering rack extensions +40mm per side
Posted 21st Feb 2011 at 02:51 Profile

will130787 Seasoned Pro Location: Reading Registered: 24 Sep 2009 Posts: 3,933 Status: Offline	Post #2 The bottom bolsters are different Martin iirc. Thinking of an easy fix rather than getting it re-covered? ________________________________________ Ex Astor 6 owner Also an Ex owner of a Bianca 6 Now an ex owner of a 2005 9-3 2.0T 210bhp Aero Swedish Saloon thing!! Soon to be 250bhp.... Now driving Mk5 Golf GTTdi, mile muncher But still live for the 306
Posted 21st Feb 2011 at 18:00 Profile

martinj Regular Location: Berkshire Registered: 12 Feb 2007 Posts: 322 Status: Offline	Post #3 Yes, looking at options to fix the seat and wondering if the various phases will fit, and whether the base bolsters are that different.... ________________________________________ - Maxi rear axle hub spacers +53mm per side - Maxi front steering rack extensions +40mm per side
Posted 21st Feb 2011 at 23:45 Profile

The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.