Post #1
hi, does anyone who still uses the forum have any idea if anyone currenty makes uprated torsion bars? i searched and found plenty on arbs but nothing recent on tb's, help on this would be a big help to me, cheers marc
|
displaying posts 1 to 19 of 19
| Author | Subject: torsion bars? |
 festa
Newbie  Location: carmarthen Registered: 30 Dec 2010 Posts: 13 Status: Offline |
|
 Posted 13th Jan 2011 at 03:30
|
|
|
chris with a pug
Seasoned Pro  Location: Southampton Registered: 16 Feb 2003 Posts: 5,366 Status: Offline |
Post #2
I brought mine off a bloke on Ebay, I just had a quick search but cant find him ill have a look see if i can find the receipt |
|
Posted 13th Jan 2011 at 06:23
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,839 Status: Offline |
Post #3
"Anthony"  ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 13th Jan 2011 at 23:12
|
|
|
miles
Seasoned Pro  Location: Ringwood Registered: 28 Dec 2002 Posts: 3,433 Status: Offline |
Post #4
Keep meaning to ask him but are these made at the same place as the 205 parts one? If so the ones back then where poor, no idea on the new ones thou ________________________________________ 306 Rallye Sptint/Race Car, 205 CTI 1.9 8v to name a fewRoad, Track and Race/Rally car preparation to your personal requirements, Full Workshop & Diagnostic Facilities New and Second parts, from Plugs to Turbo's We now also carry out Routine Servicing www.pugracing.com & FB Page, https://www.facebook.com/PugRacing Ebay; http://stores.ebay.co.uk/Pug-Racing-Shop 2012/2013/2014/2019 Class Winners at Gurston Down Speed Hillclimb & Joint overall, Class record too along the way, |
|
Posted 13th Jan 2011 at 23:43
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,839 Status: Offline |
Post #5
yeah they are I believe  I think Chris Perose aka 309pug can still do them too, might need to PM M@TT or Henry Yorke to get hold of Chris as I'm not sure if he's on here. ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 13th Jan 2011 at 23:51
|
|
|
adam b
Seasoned Pro  Location: The Nam Registered: 24 Jan 2006 Posts: 12,828 Status: Offline |
Post #6
festa - whats it for and what are you after? A small rate gain can be made with Xsara or ZX tbs.________________________________________ Nothing to see here |
|
Posted 14th Jan 2011 at 01:15
|
|
|
anthony
Regular Location: Swindon Registered: 26 Jul 2004 Posts: 108 Status: Offline |
Post #7
As above, I can supply them as required.Miles - They're made by the same engineering place, but the ones that I supply (and indeed the later 205Parts ones) are noticeably better quality/fit than the ones supplied in the initial batches. Next time I see you Miles I'm happy to bring one down to you so you can see for yourself ________________________________________ 1989 Eunos Roadster // 1992 Peugeot 205 GTi-S 1.9 // 1999 Peugeot 306 HDi Meridian |
|
Posted 14th Jan 2011 at 01:19
|
|
|
alastairh
Regular Location: Kettering Registered: 14 Jun 2007 Posts: 375 Status: Offline |
Post #8
I ran one of the three 205 parts protypes anti roll / torsion bars in my 205 GTi6 some time ago. Provided you know what you were doing and be careful, it fitted fine, i then removed it and sold it to a freind who fitted it and he still runs it to this day. I now have another fitted to my 205 (its funny how your spec changes over the years) and that is fine. They had alot of problems originally with billy no mates smacking them on with damaged end plates and no real experience of building beams, but my understanding the quality is even better now than it was 4-5 years ago. If Anthony can't sort you out, i have a huge stock of material i have been meaning to get machined at some point, its just i'm busy at the minute. Al ________________________________________ 205 GTI6Primera GT Xsara VTS 306 GTI6 |
|
Posted 14th Jan 2011 at 02:49
|
|
|
da g man!
Regular  Location: Kent Registered: 15 Jan 2006 Posts: 320 Status: Offline |
Post #9
welshpug! wrote: yeah they are I believe I think Chris Perose aka 309pug can still do them too, might need to PM M@TT or Henry Yorke to get hold of Chris as I'm not sure if he's on here. Chris Penrose is still registered on here  But hasn't posted since 2009. I bought a set of 22mm TB's off him & the quailty was second to none  Top items & still doing me proud  Heres the link to his first post: Click Me! This is the link to when I bought mine: Click Here! Chris used to supply Peugeot Sport on occasions with their TB's, so it shows the sort of quality he's producing! Try dropping him a PM & if you get no response then, do what Welsh Pug sugested above  Hope that helps |
|
Posted 14th Jan 2011 at 03:19
|
|
|
miles
Seasoned Pro Location: Ringwood Registered: 28 Dec 2002 Posts: 3,433 Status: Offline |
Post #10
Thats always handy to know as A set I had when fully up and running along with another mate I know the splines where Horrific and could alomost turn by hand in the Trailing arm but my 306 ones where fine, I guess it depended who did them.But Please note everyone this was a good 4 ish years ago now ________________________________________ 306 Rallye Sptint/Race Car, 205 CTI 1.9 8v to name a fewRoad, Track and Race/Rally car preparation to your personal requirements, Full Workshop & Diagnostic Facilities New and Second parts, from Plugs to Turbo's We now also carry out Routine Servicing www.pugracing.com & FB Page, https://www.facebook.com/PugRacing Ebay; http://stores.ebay.co.uk/Pug-Racing-Shop 2012/2013/2014/2019 Class Winners at Gurston Down Speed Hillclimb & Joint overall, Class record too along the way, |
|
Posted 14th Jan 2011 at 06:06
|
|
|
lotek
Seasoned Pro  Location: Berkshire Registered: 04 Dec 2007 Posts: 6,107 Status: Offline |
Post #11
what kind of price for a 23mm set of bars?pm me please |
|
Posted 14th Jan 2011 at 12:27
|
|
|
gtomi-6
Seasoned Pro  Location: southampton Registered: 16 Jan 2009 Posts: 1,136 Status: Offline |
Post #12
im also interested________________________________________ ph3 gti-6 china blue- mint conditionph2 gti-6 nile blue K.I.A dec 2010 |
|
Posted 14th Jan 2011 at 21:04
|
|
|
prism7guy
Seasoned Pro  Location: DoncastAAAAARGH Registered: 13 Jan 2008 Posts: 4,640 Status: Offline |
Post #13
I'm also interested in price for 23mm TB's ________________________________________ Goldie the track car. |
|
Posted 14th Jan 2011 at 22:06
|
|
|
clen666
Seasoned Pro  Location: Co. Durham Registered: 12 Feb 2009 Posts: 2,401 Status: Offline |
Post #14
me too (23.5  )________________________________________ Team 'unintentional rat look' |
|
Posted 15th Jan 2011 at 00:16
|
|
|
binkagti
Seasoned Pro  Location: canterbury Registered: 14 Oct 2006 Posts: 2,411 Status: Offline |
Post #15
and me________________________________________ TEAM Supercharged Rallye |
|
Posted 15th Jan 2011 at 00:22
|
|
|
da g man!
Regular Location: Kent Registered: 15 Jan 2006 Posts: 320 Status: Offline |
Post #16
da g man! wrote: This is the link to when I bought mine: Click Here! The price & info is in my link from above ^^^^^^^, But that was in 2009. Not sure if he's still making them & its fair to assume that the price will only increase not decrease, so your all looking at a minimum of £325 for the pair. (not each!) Like I said before, for those that are interested, he's still registered on here, so try dropping him a PM, if you get no reply, then try WelshPugs idea listed above Hope that helps guys |
|
Posted 15th Jan 2011 at 03:51
|
|
|
gti-dan
Regular  Location: Yorkshire Registered: 03 Jan 2010 Posts: 461 Status: Offline |
Post #17
Anyone I had any joy? I need some 23.5s |
|
Posted 28th Jan 2011 at 03:36
|
|
|
rallycross
Regular  Location: kingston Registered: 01 Oct 2004 Posts: 204 Status: Offline |
Post #18
I am going to order some for my racing car has anyone got contact details for chris P please |
|
Posted 28th Jan 2011 at 23:28
|
|
|
anthony
Regular Location: Swindon Registered: 26 Jul 2004 Posts: 108 Status: Offline |
Post #19
As said, if you don't get any luck I can supply them, but you're best off PM'ing me as I don't spend alot of time on this forum.I'll need to double-check the price, but they should work out a fair bit cheaper than the price of the previous group buy. They're made to order in whatever size you require, usually with a 3-4 week lead time. There's a handful of people on 205GTiDrivers that are happily running bars that I've supplied. ________________________________________ 1989 Eunos Roadster // 1992 Peugeot 205 GTi-S 1.9 // 1999 Peugeot 306 HDi Meridian |
|
Posted 30th Jan 2011 at 02:14
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.