|
displaying posts 1 to 11 of 11
| Author | Subject: Baker lower engine mounts |
 gti-dan
Regular  Location: Yorkshire Registered: 03 Jan 2010 Posts: 461 Status: Offline |
Post #1
After reading on here I believe the main mount to swap to reduce movement is the lower mount.I read on hear it's important to replace the bush on the "fork"? But that the baker one did not fit. I have contacted them and they have verified this but have said they may make one if I'm interested. I am going to say yes, is anyone else interested? |
 Posted 12th Jan 2011 at 01:14
|
|
Rich E
Forum Admin Location: Hertfordshire Registered: 27 Apr 2005 Posts: 7,757 Status: Offline |
Post #2
The standard one is fine. If it's worn then just replace it like for like.________________________________________ Rich |
|
Posted 12th Jan 2011 at 01:24
|
|
|
rthorne
Junior User  Location: gwynedd Registered: 09 Aug 2010 Posts: 56 Status: Offline |
Post #3
Does any1 have a moonstone blue smooth bonnet + grill________________________________________ Moonstone gti6 |
|
Posted 12th Jan 2011 at 01:29
|
|
|
Rich E
Forum Admin Location: Hertfordshire Registered: 27 Apr 2005 Posts: 7,757 Status: Offline |
Post #4
rthorne wrote: Does any1 have a moonstone blue smooth bonnet + grill In the middle of a thread about engine mounts?! Sort yourself out. ________________________________________ Rich |
|
Posted 12th Jan 2011 at 01:38
|
|
|
daveyboy
aka Jim Davey  Location: Southampton Registered: 01 Oct 2007 Posts: 8,648 Status: Offline |
Post #5
rthorne wrote: Does any1 have a moonstone blue smooth bonnet + grill I'm not bothering to answer any more of your stupid questions, especially as you can't even be arsed to post them in an even remotely relevant section you timewasting twat. PS sorry for spamming up your thread Dan. ________________________________________ R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.Some of my services: (See my for sale threads) Engine mount/chassis repair Solid Beam Mounts BACK IN PRODUCTION Harness bars |
|
Posted 12th Jan 2011 at 01:43
|
|
|
gti-dan
Regular Location: Yorkshire Registered: 03 Jan 2010 Posts: 461 Status: Offline |
Post #6
Haha it's ok! I've seen these random posts popping all over the place! Can't be for real! |
|
Posted 12th Jan 2011 at 01:45
|
|
|
james_gti6
Senior User  Location: Goodwick Registered: 18 Jan 2010 Posts: 528 Status: Offline |
Post #7
gti-dan wrote: After reading on here I believe the main mount to swap to reduce movement is the lower mount. I read on hear it's important to replace the bush on the "fork"? But that the baker one did not fit. I have contacted them and they have verified this but have said they may make one if I'm interested. I am going to say yes, is anyone else interested? yes i am interested, would they also make a gearbox mount as i need one ________________________________________ if i dont see you in the mattress il see you in the spring |
|
Posted 12th Jan 2011 at 01:46
|
|
|
daveyboy
aka Jim Davey Location: Southampton Registered: 01 Oct 2007 Posts: 8,648 Status: Offline |
Post #8
james_gti6 wrote: gti-dan wrote: After reading on here I believe the main mount to swap to reduce movement is the lower mount. I read on hear it's important to replace the bush on the "fork"? But that the baker one did not fit. I have contacted them and they have verified this but have said they may make one if I'm interested. I am going to say yes, is anyone else interested? yes i am interested, would they also make a gearbox mount as i need one They do a complete set of engine/gearbox mounts, the fork bush is the only mount they DON'T currently do  ________________________________________ R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.Some of my services: (See my for sale threads) Engine mount/chassis repair Solid Beam Mounts BACK IN PRODUCTION Harness bars |
|
Posted 12th Jan 2011 at 01:51
|
|
|
james_gti6
Senior User Location: Goodwick Registered: 18 Jan 2010 Posts: 528 Status: Offline |
Post #9
daveyboy wrote: james_gti6 wrote: gti-dan wrote: After reading on here I believe the main mount to swap to reduce movement is the lower mount. I read on hear it's important to replace the bush on the "fork"? But that the baker one did not fit. I have contacted them and they have verified this but have said they may make one if I'm interested. I am going to say yes, is anyone else interested? yes i am interested, would they also make a gearbox mount as i need one They do a complete set of engine/gearbox mounts, the fork bush is the only mount they DON'T currently do they say there out of stock, also they dont reply to emails. ________________________________________ if i dont see you in the mattress il see you in the spring |
|
Posted 12th Jan 2011 at 01:53
|
|
|
Rich E
Forum Admin Location: Hertfordshire Registered: 27 Apr 2005 Posts: 7,757 Status: Offline |
Post #10
Phone them then? They have a contact number on the website.________________________________________ Rich |
|
Posted 12th Jan 2011 at 02:01
|
|
|
miles
Seasoned Pro  Location: Ringwood Registered: 28 Dec 2002 Posts: 3,433 Status: Offline |
Post #11
The lower Fork one if used will transmit allot and I mean allot of noise and vibration into the cabin, OK for track work but on a road car would drive you mad, A new OE one is only a few quid________________________________________ 306 Rallye Sptint/Race Car, 205 CTI 1.9 8v to name a fewRoad, Track and Race/Rally car preparation to your personal requirements, Full Workshop & Diagnostic Facilities New and Second parts, from Plugs to Turbo's We now also carry out Routine Servicing www.pugracing.com & FB Page, https://www.facebook.com/PugRacing Ebay; http://stores.ebay.co.uk/Pug-Racing-Shop 2012/2013/2014/2019 Class Winners at Gurston Down Speed Hillclimb & Joint overall, Class record too along the way, |
|
Posted 12th Jan 2011 at 02:26
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.