|
displaying posts 1 to 4 of 4
| Author | Subject: phase 3 fog light query |
paulmarsh86
Newbie Location: Redditch Registered: 29 Oct 2010 Posts: 14 Status: Offline |
Post #1
I have just brought a 306hdi phase 3 and have rust inside my fog light. Is it a sealed unit? or can it be opened cleaned up and put back together? If it does need replaceing is it an easy job? and how much are these second hand? |
|
|
|
bigbadbowen
Seasoned Pro Location: Winchester Registered: 21 Nov 2003 Posts: 13,753 Status: Offline |
Post #2
They rust on the silver inside bit - they are not sealed and can be opened but a new one only costs £30 on ebay pretty easy to replace and can be done without the bumper coming off just a bit fiddly |
|
|
|
paulmarsh86
Newbie Location: Redditch Registered: 29 Oct 2010 Posts: 14 Status: Offline |
Post #3
bigbadbowen wrote: They rust on the silver inside bit - they are not sealed and can be opened but a new one only costs £30 on ebay pretty easy to replace and can be done without the bumper coming off just a bit fiddly Cheers buddy, thanks for the advice. |
|
|
|
bennn
Seasoned Pro Location: Shrewsbury Registered: 05 Sep 2008 Posts: 2,705 Status: Offline |
Post #4
paulmarsh86 wrote: I have just brought a 306hdi phase 3 and have rust inside my fog light. Is it a sealed unit? or can it be opened cleaned up and put back together? If it does need replaceing is it an easy job? and how much are these second hand? I dont think you'll be able to clean it up mate, as i think its the chrome paint stuff flaking off. ________________________________________ Cherry Red 306 HDIChampionship White Integra DC5 Type R |
|
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2026 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy. (NEW HOST)