|
displaying posts 1 to 3 of 3
| Author | Subject: Changing fan relay box and harness? |
 mikebee
Regular  Location: Northampton Registered: 17 Aug 2010 Posts: 122 Status: Offline |
Post #1
Need to change the fan relay box (triangular box on the fan shroud) on my ph3 GTi-6. One of the relay pins has corroded and snapped off...First question, is the harness to the Bitron unit integral with the relay box? Secondly, do I need to take the radiators out or is it easier to get at it from the front with the bumper off?? Thanks, |
 Posted 15th Oct 2010 at 16:35
|
|
|
phat 206
Regular  Location: Airdrie Registered: 13 Jun 2003 Posts: 185 Status: Offline |
Post #2
Best to get it from the front with bumper off and four bolts to take off headlamp panel. The bitron unit is part of the main loom then joins to the fan loom via a round multi plug bottom right of the fan cowling.Rab E. ________________________________________ Puggy Spanner Monkey. 607 HDi SE 205 1.6 CTI 306 GTI-6 205 1.6 GTI Grass Track Car 405 MI16x4 |
|
Posted 16th Oct 2010 at 02:52
|
|
|
mikebee
Regular Location: Northampton Registered: 17 Aug 2010 Posts: 122 Status: Offline |
Post #3
Cool. Thanks. |
|
Posted 16th Oct 2010 at 15:16
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.