Post #1
I know that this is a vague question but if you install R1 throttle bodies on a standard 6 running the standard ECU - with there be any performance benefits?
|
displaying posts 1 to 5 of 5
| Author | Subject: R1 throttle Body conversion |
 gtylerroberts@manx.net
Regular  Location: Ramsey Registered: 24 Mar 2008 Posts: 102 Status: Offline |
|
 Posted 7th Sep 2010 at 17:34
|
|
|
daveyboy
aka Jim Davey  Location: Southampton Registered: 01 Oct 2007 Posts: 8,648 Status: Offline |
Post #2
It won't without a remap (£400) from Chip Wizzards, and you will need to make up a decent manifold and throttle linkage. If you do it well 10-20 hp is on the cards. There is potential for going backwards or having running issues if it's botched though.________________________________________ R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.Some of my services: (See my for sale threads) Engine mount/chassis repair Solid Beam Mounts BACK IN PRODUCTION Harness bars |
|
Posted 7th Sep 2010 at 17:40
|
|
|
daveyboy
aka Jim Davey Location: Southampton Registered: 01 Oct 2007 Posts: 8,648 Status: Offline |
Post #3
By the way I'm selling these if you're interested? I'll post up some recent pics tomorrow but my Jenveys are up for sale. What you get 2x DCOE 45 Bodies (Black) 4x 90mm Trumpets (Ally) 1x Pipercross Dome filter 1x Pipercross Backplate with nice welded on bracket for IAC sensor. 1x Custom air inlet heatshield 1x Fuel rail (Jenvey ally item) with 8mm male hose tails. I'm upgrading to 48<51mm taper bodies with 8 injectors and a custom airbox so I'll be keeping the sensors, TPS, linkage kit and OMEX ECU and loom. The inlet has also already been sold. They are about a year and a half old, and as most of you know I blew my car up in September of last year so they have'nt exactly seen a lot of action  I'll be bunging these on Pistonheads and Egay but I thought I'd give them a week or two on here first. Looking for £595.00 or a near offer. Some pics when of when it was in the car...      ________________________________________ R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.Some of my services: (See my for sale threads) Engine mount/chassis repair Solid Beam Mounts BACK IN PRODUCTION Harness bars |
|
Posted 7th Sep 2010 at 17:41
|
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,796 Status: Offline |
Post #4
use a proper mani too and not silicon joiners________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
|
Posted 7th Sep 2010 at 18:01
|
|
|
gtylerroberts@manx.net
Regular Location: Ramsey Registered: 24 Mar 2008 Posts: 102 Status: Offline |
Post #5
Thanks for all your help on this guys. |
|
Posted 8th Sep 2010 at 01:21
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.