Post #1
how do i remove it and do other peugeots have the same eg 206 406jalittle has attached the following image:
|
displaying posts 1 to 11 of 11
| Author | Subject: URGANT help snapped engine mount |
 jalittle
Regular  Location: Dover Registered: 07 Feb 2010 Posts: 164 Status: Offline |
|
 Posted 27th Aug 2010 at 23:59
|
|
|
bigbadbowen
Seasoned Pro  Location: Winchester Registered: 21 Nov 2003 Posts: 13,753 Status: Offline |
Post #2
Hammer and chisel type tool you bash it round anti clockwise to undo - thats what the cut out bits are for  |
|
Posted 28th Aug 2010 at 00:00
|
|
|
yippeekayay
Seasoned Pro  Location: wilts Registered: 27 Oct 2008 Posts: 4,144 Status: Offline |
Post #3
hit the square cut outs with a drift anti clockwise until it moves and will then trun by hand if your lucky. there is a specialist tool that fits the 3 cut outs but a decent blunt flat blade screwdriver or drift will do the job... remember its...anti clockwise.....________________________________________ 306 less for first time in nearly 7 years. Lets keep it that way... please refuse any offers i make to buy your 306 ( doctors letter supplied by request)Marmite and cheese sandwiches anyone??? Burns and Mcrae will be forever missed. x box "yippeekayaymofo" |
|
Posted 28th Aug 2010 at 00:01
|
|
|
bigbadbowen
Seasoned Pro Location: Winchester Registered: 21 Nov 2003 Posts: 13,753 Status: Offline |
Post #4
same design on the 205 not sure about 206 but prob and no I think they are slightly different types between cars ie a 205 one shouldn't be used for a 306 |
|
Posted 28th Aug 2010 at 00:02
|
|
|
jalittle
Regular Location: Dover Registered: 07 Feb 2010 Posts: 164 Status: Offline |
Post #5
thanks for the help i will try and get the special tool from work |
|
Posted 28th Aug 2010 at 00:20
|
|
|
yippeekayay
Seasoned Pro Location: wilts Registered: 27 Oct 2008 Posts: 4,144 Status: Offline |
Post #6
jalittle wrote: thanks for the help i will try and get the special tool from work just hit it with a drift/screwdriver or use a long nosed or large set of molegrips and spin round especially if you arent going to use it again. ________________________________________ 306 less for first time in nearly 7 years. Lets keep it that way... please refuse any offers i make to buy your 306 ( doctors letter supplied by request)Marmite and cheese sandwiches anyone??? Burns and Mcrae will be forever missed. x box "yippeekayaymofo" |
|
Posted 28th Aug 2010 at 00:49
|
|
|
jalittle
Regular Location: Dover Registered: 07 Feb 2010 Posts: 164 Status: Offline |
Post #7
cant use it again its snaped  |
|
Posted 28th Aug 2010 at 02:09
|
|
|
yippeekayay
Seasoned Pro Location: wilts Registered: 27 Oct 2008 Posts: 4,144 Status: Offline |
Post #8
jalittle wrote: cant use it again its snaped so give it a p*sser, sorry didnt see the broken top on my mobile!!!  ________________________________________ 306 less for first time in nearly 7 years. Lets keep it that way... please refuse any offers i make to buy your 306 ( doctors letter supplied by request)Marmite and cheese sandwiches anyone??? Burns and Mcrae will be forever missed. x box "yippeekayaymofo" |
|
Posted 28th Aug 2010 at 05:38
|
|
|
midlife
Seasoned Pro  Location: Colne, Lancashire Registered: 13 Mar 2006 Posts: 7,544 Status: Offline |
Post #9
Bfohftw  ________________________________________ Get used to seeing the yellow one !!! Team 330™ Team "no front end or engine" Team "LIMITED EDITION" I live for the 306 sticker  Team 0-60 in 6.44 & standing qtr in 14.808 @ 94.55mph all with std engine 203bhp Corolla T-Sport daily driver stealthier than Kwai Chang Caine |
|
Posted 28th Aug 2010 at 05:49
|
|
|
mabgti
NV motors  Location: Bham tunnel @7400rpm Registered: 28 Aug 2003 Posts: 9,127 Status: Offline |
Post #10
nope 60mm hole saw in reverse________________________________________ Team Supercharged Gti-6NV Motorsport Automotive Performance Tuning 0121 448 7515 ECU Remapping/ DPF removal VAG/BMW Diag and Option Coding Peugeot Planet ECU coding/transponder programming etc www.nvmotorsport.com Facebook Page Project S6 |
|
Posted 28th Aug 2010 at 06:30
|
|
rikky
Pikey Location: cheshire Registered: 28 Feb 2004 Posts: 26,797 Status: Offline |
Post #11
 i did that in the end, mine wouldn't come out with anything. tried all sorts- crowbar, smashing it with everything under the sun.. then just spun it round with the hole saw________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
|
Posted 28th Aug 2010 at 16:27
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2025 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.