|
displaying posts 1 to 3 of 3
| Author | Subject: A little dilema... |
 lwgti-6
Senior User  Location: Nottinghamshire Registered: 27 Oct 2008 Posts: 906 Status: Offline |
Post #1
Just in the process of refurbing some hub and hub carriers and i've noticed that the hub themself look different. One has a slightly larger diamiter hole for the drive shaft to sit in than the other. Its odd because the hubs carriers are off a GTI-6 i do believe.   A little stumped by this....Anyone shed any light? ________________________________________ EX Bianca 6 owner,Now drives: Octavia vRS |
 Posted 3rd Jun 2010 at 03:21
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,839 Status: Offline |
Post #2
look fine to me  ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 3rd Jun 2010 at 03:39
|
|
|
lwgti-6
Senior User Location: Nottinghamshire Registered: 27 Oct 2008 Posts: 906 Status: Offline |
Post #3
Look at the left hub compared to the one on the right....They are also slightly different design.Left = larger Right = smaller I've used a vernier to measure the inner diamieter and they appear to be the same but yet they look smaller. Baffled me.. ________________________________________ EX Bianca 6 owner,Now drives: Octavia vRS |
|
Posted 3rd Jun 2010 at 03:42
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.