|
displaying posts 1 to 6 of 6
| Author | Subject: one side higher than the other |
 geedawg
Senior User  Location: out there Registered: 23 Feb 2004 Posts: 594 Status: Offline |
Post #1
weird 1 thislooking at the car today and noticed that either the front right is 2" lower or the rear left is 2" higher, drove it just now and no nasty noises from the front. dont think its a spring thats snapped but will have a better look in the morning. its in need of a left p bush and some rear beam mounts but cant see this being the problem |
 Posted 1st Jun 2010 at 02:52
|
|
|
bennn
Seasoned Pro  Location: Shrewsbury Registered: 05 Sep 2008 Posts: 2,705 Status: Offline |
Post #2
leaking shocker?________________________________________ Cherry Red 306 HDIChampionship White Integra DC5 Type R |
|
Posted 1st Jun 2010 at 03:03
|
|
|
geedawg
Senior User Location: out there Registered: 23 Feb 2004 Posts: 594 Status: Offline |
Post #3
Ok had a better look today and the n/s droplink has gone, will pick up a new one in the morning Will this cause the change in height |
|
Posted 1st Jun 2010 at 23:03
|
|
|
jonnie205
Seasoned Pro  Location: Bicester Registered: 10 Apr 2005 Posts: 4,146 Status: Offline |
Post #4
nope, likely to be a snapped spring or rear beam bearing shot |
|
Posted 1st Jun 2010 at 23:11
|
|
|
geedawg
Senior User Location: out there Registered: 23 Feb 2004 Posts: 594 Status: Offline |
Post #5
springs are fine,if the beam was dead would it be stuck in one position hence up at one corner?stood on the edge of the boot and bounced it up and down a few times and everything seamed to move ans sound as it shoud |
|
Posted 1st Jun 2010 at 23:54
|
|
|
brochloon
Junior User Location: aberdeenshire Registered: 03 Oct 2009 Posts: 76 Status: Offline |
Post #6
geedawg wrote: springs are fine,if the beam was dead would it be stuck in one position hence up at one corner? stood on the edge of the boot and bounced it up and down a few times and everything seamed to move ans sound as it shoud mines been the same since i got it. Cant find anything wrong and mot never found anything. Only thing i noticed is the anti-roll bar was over to one side, but slackened it off and prised it back and it stayed. Car still squint though haha. I think its the shock ________________________________________ PH3 Cherry 6 |
|
Posted 2nd Jun 2010 at 03:35
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.