|
displaying posts 1 to 5 of 5
| Author | Subject: cam and ? |
 thestig
Newbie  Location: adelaide Registered: 16 Mar 2010 Posts: 8 Status: Offline |
Post #1
g'day pommy wasters.My 6 has a good exhaust and a K&N air filter. Im getting a stage 2 cam put in i want to know what sort of other things should i get done while the mechanic puts the cam in. I really don't want to drive it after and think, i need more power then have to pay him to pull it apart again and do something else. thanks |
 Posted 28th Apr 2010 at 13:22
|
|
Rich E
Forum Admin Location: Hertfordshire Registered: 27 Apr 2005 Posts: 7,757 Status: Offline |
Post #2
Peter Taylor's stage 2 inlet?To be honest middle of the range uprated cams and a remap is about the best you can do without spending a lot more money on either throttle bodies or forced induction. ________________________________________ Rich |
|
Posted 28th Apr 2010 at 14:08
|
|
|
thestig
Newbie Location: adelaide Registered: 16 Mar 2010 Posts: 8 Status: Offline |
Post #3
yea I'm getting a petert stage 2 cam.Now I'm trying to find a set of good forged pistons and rods that come with a liner kit. Does any one know of a sight to get them from? They need to come with the liner kit. |
|
Posted 29th Apr 2010 at 16:41
|
|
|
daveyboy
aka Jim Davey  Location: Southampton Registered: 01 Oct 2007 Posts: 8,648 Status: Offline |
Post #4
thestig wrote: yea I'm getting a petert stage 2 cam. Now I'm trying to find a set of good forged pistons and rods that come with a liner kit. Does any one know of a sight to get them from? They need to come with the liner kit. Liner kit? The XU10J4RS does'nt have liners, its an all iron block. Speak to Rich W for good prices on Wossner pistons and PEC rods. ________________________________________ R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.Some of my services: (See my for sale threads) Engine mount/chassis repair Solid Beam Mounts BACK IN PRODUCTION Harness bars |
|
Posted 29th Apr 2010 at 16:50
|
|
|
thestig
Newbie Location: adelaide Registered: 16 Mar 2010 Posts: 8 Status: Offline |
Post #5
OK thanks daveyboy I will have to sort my mechanic out then. cheers  |
|
Posted 29th Apr 2010 at 17:08
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.