Author	Subject: ZX rear shocks
cwspellowe Seasoned Pro Location: Calderbank Registered: 19 Jul 2009 Posts: 6,496 Status: Offline	Post #1 Am i right in thinking the ZX 2.0 16v rear shocks are the same fit as the 306 GTI6? ________________________________________ Bye bye Sundance Kid
Posted 29th Mar 2010 at 03:35 Profile

welshpug! Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,866 Status: Offline	Post #2 same fit, uprated and slightly shorter IIRC. ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.com Bring on the Trumpets.
Posted 29th Mar 2010 at 03:36 Profile

cwspellowe Seasoned Pro Location: Calderbank Registered: 19 Jul 2009 Posts: 6,496 Status: Offline	Post #3 Just what i wanted to hear, cheers mate So at a guess, they should be fine for lowered rear end? It's not getting slammed, more for cosmetic purposes. Noticed my N/S rear isn't extending fully any more so need to replace them if i want to lower it.. ________________________________________ Bye bye Sundance Kid
Posted 29th Mar 2010 at 03:38 Profile

sixysix Seasoned Pro Location: London Registered: 27 Mar 2006 Posts: 2,659 Status: Offline	Post #4 Fitted these when Neil and I replaced suspension, and lowered 30mm last summer. So far so good ________________________________________ My Pugrun 2007/2009 video clips Take a look Pugrun 2007...Lose yourself Xbox Live ID: Marksixysix (Forza 3, Forza 4 PES 2010, COD 6/MW2, WRC 2010). PSN ID: MarkSixysix ( DiRT 3 GT5, NFS:Hot pursuit). P1 Diablo red 6 gone but not forgotten
Posted 29th Mar 2010 at 03:55 Profile

welshpug! Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,866 Status: Offline

Post #5 cwspellowe wrote: Just what i wanted to hear, cheers mate So at a guess, they should be fine for lowered rear end? It's not getting slammed, more for cosmetic purposes. Noticed my N/S rear isn't extending fully any more so need to replace them if i want to lower it.. I'd be checking the beam isn't partially seized on that side. ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.com Bring on the Trumpets.

Posted 29th Mar 2010 at 03:57 Profile

cwspellowe Seasoned Pro Location: Calderbank Registered: 19 Jul 2009 Posts: 6,496 Status: Offline	Post #6 It's not, had it all apart when I did the rear mounts ________________________________________ Bye bye Sundance Kid
Posted 29th Mar 2010 at 03:58 Profile

jonnie205 Seasoned Pro Location: Bicester Registered: 10 Apr 2005 Posts: 4,146 Status: Offline	Post #7 xsara vts ones are shorter body too so ideal for lowered cars
Posted 29th Mar 2010 at 23:57 Profile

cwspellowe Seasoned Pro Location: Calderbank Registered: 19 Jul 2009 Posts: 6,496 Status: Offline	Post #8 Was just asking because i got them at a good price new. Beam's getting lowered probably this month so just prepping for it ________________________________________ Bye bye Sundance Kid
Posted 30th Mar 2010 at 22:04 Profile

The Peugeot GTi-6 & Rallye Owners Club - ©2026 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy. (NEW HOST)