Post #1
Hi there, ok iv basically changed the manifold on my xsi 2.0 to a 6 one and i havent been noticing much difference to the car, and it was feeling a bit slugish, so i tried changing the pipes around and i put some blue silicon pipes on there, now the car is pulling but only when im at standstill, it does sometimes pull but very rarerly, so i tried a ecu reset and now its like seting me back and lost so much power, it does pull slightly but not like before, any idea's anyone?
|
displaying posts 1 to 2 of 2
| Author | Subject: XSi to gti6 manifold |
 pugmister
Regular  Location: Birmingham Registered: 06 Nov 2009 Posts: 222 Status: Offline |
|
 Posted 26th Mar 2010 at 02:00
|
|
|
ballys16
Regular  Location: Godollo Registered: 05 Mar 2009 Posts: 247 Status: Offline |
Post #2
pugmister wrote: Hi there, ok iv basically changed the manifold on my xsi 2.0 to a 6 one and i havent been noticing much difference to the car, and it was feeling a bit slugish, so i tried changing the pipes around and i put some blue silicon pipes on there, now the car is pulling but only when im at standstill, it does sometimes pull but very rarerly, so i tried a ecu reset and now its like seting me back and lost so much power, it does pull slightly but not like before, any idea's anyone? Not sure how different the two are, but I feel that the mani was intended for the GTi head (cams, tb etc) to work well... ________________________________________ XSi 8V -> S16 |
|
Posted 26th Mar 2010 at 02:36
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.