Post #1
My central locking started to play up so i took my door off and there was loads of wires snapped so i thought i'd go the the scrapyard and get a replacement off another car but i did a stupid thing, i cut the whole broken plug off to take with me so i could match the pins up with another loom plug without thinking about what wires went where and what makes it worse most of the numbers have worn off or can't be seen. anyone got any ideas. My car has no electric windows or mirrors.
|
displaying posts 1 to 5 of 5
| Author | Subject: Big broken door loom problem |
 ste-sim
Newbie  Location: stoke-on-trent Registered: 13 Dec 2009 Posts: 43 Status: Offline |
|
 Posted 15th Mar 2010 at 02:23
|
|
|
ste-sim
Newbie Location: stoke-on-trent Registered: 13 Dec 2009 Posts: 43 Status: Offline |
Post #2
Went down peugeot to see about a new repair loom and i can't believe they want |
|
Posted 15th Mar 2010 at 17:06
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,839 Status: Offline |
Post #3
I can, its a pretty big piece of loom that includes every single piece of wiring.they also don't sell many in the grand scheme of things. ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 15th Mar 2010 at 18:09
|
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,796 Status: Offline |
Post #4
http://www.306gti6.com/forum/showthread.php?id=115446&page=1get soldering like the rest of us  out of interest what is the "repair loom"? is it the plug complete with lengths of wiring to solder, or the loom from the plug right back to the next part? i can't even remember how they are, i cut mine out of my other track 306 and used all the spare wiring for various things ________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
|
Posted 15th Mar 2010 at 19:57
|
|
|
ste-sim
Newbie Location: stoke-on-trent Registered: 13 Dec 2009 Posts: 43 Status: Offline |
Post #5
Ya rikky its the plug complete with lengths of wiring to solder. I'm not paying |
|
Posted 15th Mar 2010 at 22:04
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.