My loom wires between my drivers door had broken. I cut he remaining wires without thinking about where they go. I need to trace the wires as i can't see the wire numbers and don't know what wire goes where. I have done continuity test by unconnecting the loom that goes from the control unit under the rear seat to the door. I have found wires 6201,6211,6290,6291 and M623. These wires go to pins 1,2,3,4 and 7 on my locking motor in the door but there pins 5,6,8,9 on the motor in the door and i don't know what wires go to them as i don't know where they go. The haynes manual diagram does not show these pins. My car has no electric windows or mirrors.