|
displaying posts 1 to 5 of 5
| Author | Subject: Strut top mount |
 nick!
Seasoned Pro  Location: Essex Registered: 20 Nov 2007 Posts: 1,191 Status: Offline |
Post #1
I made the school boy error of threading one of the holes in the strut top mount when I was re-fitting my strutbrace.Is it possible to get this re-threaded, or is a new mount/cradle thing needed? ________________________________________ Cherry Red Rallye - 179.1bhp@fly, 148.4bhp@wheels |
 Posted 2nd Feb 2010 at 22:58
|
|
|
buzzbrightyear
Seasoned Pro  Location: hiding all receipts for car Registered: 09 Jul 2008 Posts: 11,901 Status: Offline |
Post #2
could rethread it and use a different bolt i would of thought.a new ones is about ________________________________________ andrew315rawson@live.co.ukMoonstone phase 7 gti6 My Project thread: http://www.306gti6.com/forum/showthread.php?id=119992&page=1 |
|
Posted 3rd Feb 2010 at 14:46
|
|
|
bennn
Seasoned Pro  Location: Shrewsbury Registered: 05 Sep 2008 Posts: 2,705 Status: Offline |
Post #3
nick! wrote: I made the school boy error of threading one of the holes in the strut top mount when I was re-fitting my strutbrace. Is it possible to get this re-threaded, or is a new mount/cradle thing needed? I did this but as the threads of the bolts for the top mounts are closer together than a normal bolt i just screwed a normal M8 bolt (the same length) through the hole and it re-threaded itself. Did the job temporarily as i couldnt get hold of a new mount right away, but not sure how this would hold up long term. ________________________________________ Cherry Red 306 HDIChampionship White Integra DC5 Type R |
|
Posted 3rd Feb 2010 at 17:47
|
|
|
tez_306
Junior User  Location: Australia Registered: 16 Sep 2009 Posts: 68 Status: Offline |
Post #4
Use a longer bolt with a nut on the bottom. Will be okay on the front bolt, if its the other bolts then it will foul against the spring top. |
|
Posted 3rd Feb 2010 at 19:05
|
|
|
ben306
Seasoned Pro  Location: North West Registered: 17 Jan 2006 Posts: 2,942 Status: Offline |
Post #5
Self tap screw?________________________________________ My 306 Rallye Project ThreadFew recent Youtube track videos, more on my channel Pair of Rallye's doing a few laps of Anglesey Lap of Anglesey Coastal 3 sisters circuit Few laps at Blyton |
|
Posted 3rd Feb 2010 at 19:16
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.