Author	Subject: GTI6 bottom end Vs XSI Head with 6's cam
mc leong Junior User Location: kajang Registered: 25 Oct 2007 Posts: 97 Status: Offline	Post #1 could any body tell me this setup will be powerfull than original 6's head? reason of xsi valve bigger that 6's .
Posted 27th Nov 2009 at 22:06 Profile

welshpug! Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,866 Status: Offline	Post #2 it will be close, are you using the gti6 cams? ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.com Bring on the Trumpets.
Posted 27th Nov 2009 at 22:18 Profile

mc leong Junior User Location: kajang Registered: 25 Oct 2007 Posts: 97 Status: Offline	Post #3 welshpug! wrote: it will be close, are you using the gti6 cams? Yes , using gti6's cam on xsi head with gti6 bottom end
Posted 27th Nov 2009 at 22:23 Profile

Rich E Forum Admin Location: Hertfordshire Registered: 27 Apr 2005 Posts: 7,757 Status: Offline	Post #4 The inlet valves are a little bigger but the exhaust valves are quite a bit smaller. It would make less than GTi power, but not by much. ________________________________________ Rich
Posted 28th Nov 2009 at 05:11 Profile

mc leong Junior User Location: kajang Registered: 25 Oct 2007 Posts: 97 Status: Offline	Post #5 Rich E wrote: The inlet valves are a little bigger but the exhaust valves are quite a bit smaller. It would make less than GTi power, but not by much. Thanks for info ....
Posted 28th Nov 2009 at 09:06 Profile

The Peugeot GTi-6 & Rallye Owners Club - ©2026 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy. (NEW HOST)