Author	Subject: Brembo bleed nipples?
MCH_GTi6 formerly mch Location: Hayle Registered: 09 Sep 2005 Posts: 2,456 Status: Offline	Post #1 What size are the bleed nipples for 406 brembo's? I've just dropped mine off to be powdercoated and left the bleed nipples on to stop the thread being coated... So wanna replace em when I get them back ________________________________________ Team Moonstone� Ph3 GTI6 Team Rallye
Posted 5th Oct 2009 at 22:41 Profile

welshpug! Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,847 Status: Offline	Post #2 10x1 I believe ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.com Bring on the Trumpets.
Posted 5th Oct 2009 at 22:49 Profile

cosmic spanner Moral objector Location: North London Registered: 11 Oct 2004 Posts: 10,399 Status: Offline	Post #3 yep just went out and measured - M10 x 1.00mm ________________________________________ Democracy is two wolves and a lamb voting on what to have for lunch.. ..Liberty is a well-armed lamb contesting the vote. Project é - my 306 project thread.
Posted 6th Oct 2009 at 01:23 Profile

MCH_GTi6 formerly mch Location: Hayle Registered: 09 Sep 2005 Posts: 2,456 Status: Offline	Post #4 Cool thanks guys ________________________________________ Team Moonstone� Ph3 GTI6 Team Rallye
Posted 6th Oct 2009 at 01:50 Profile

MCH_GTi6 formerly mch Location: Hayle Registered: 09 Sep 2005 Posts: 2,456 Status: Offline	Post #5 Rather than open a new thread, what are better to use Stainless steel bleeders and connectors for the crossovers or Copper (if available?) ________________________________________ Team Moonstone� Ph3 GTI6 Team Rallye
Posted 9th Oct 2009 at 03:56 Profile

MCH_GTi6 formerly mch Location: Hayle Registered: 09 Sep 2005 Posts: 2,456 Status: Offline	Post #6 anyone? ________________________________________ Team Moonstone� Ph3 GTI6 Team Rallye
Posted 9th Oct 2009 at 21:07 Profile

saveloy Newbie Location: london Registered: 21 Jun 2009 Posts: 47 Status: Offline	Post #7 If you can find them, stainless would be best. AP used to sell Stainless bleed nipples, but I'm not sure if they still do. Be sure to keep the nipples on them all the time, too.
Posted 15th Oct 2009 at 18:52 Profile

The Peugeot GTi-6 & Rallye Owners Club - ©2025 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.