Post #1
hey guys can someone tell me what this pipe is, its the small pipe coming of the air filter to throttleboddy large pipe? mine is split where it connect onto the large pipe, thanks
|
displaying posts 1 to 6 of 6
| Author | Subject: pipe? |
 lilnickgti6
Junior User  Location: flintshire Registered: 29 Aug 2009 Posts: 85 Status: Offline |
|
 Posted 27th Sep 2009 at 02:16
|
|
|
buzzbrightyear
Seasoned Pro  Location: hiding all receipts for car Registered: 09 Jul 2008 Posts: 11,901 Status: Offline |
Post #2
is it the pipe that goes to the stepper motor?? not that sure as mine hasnt got ir ________________________________________ andrew315rawson@live.co.ukMoonstone phase 7 gti6 My Project thread: http://www.306gti6.com/forum/showthread.php?id=119992&page=1 |
|
Posted 27th Sep 2009 at 02:40
|
|
|
lilnickgti6
Junior User Location: flintshire Registered: 29 Aug 2009 Posts: 85 Status: Offline |
Post #3
not sure where the stepper motor is, the pipe is about 1 inch down the pipe from the throttlebody, also when i took the large pipe off i could see oil in the throttlebody, anyone any ideas why there is oil? |
|
Posted 27th Sep 2009 at 02:44
|
|
|
rich-6
Seasoned Pro  Location: Bottoming out! Registered: 06 May 2007 Posts: 5,306 Status: Offline |
Post #4
Sounds like the breather pipe, Its normal to have a bit of oil________________________________________  RIP Pete Sims |
|
Posted 27th Sep 2009 at 02:46
|
|
|
sixysix
Seasoned Pro  Location: London Registered: 27 Mar 2006 Posts: 2,659 Status: Offline |
Post #5
Its' the pipe that connects to the stepper motor/ idle control valve.Mine split and made the car run lumpy or cause stalling similar to that of a failed stepper motor. Think the whole pipework from pug was around ________________________________________ My Pugrun 2007/2009 video clipsTake a look Pugrun 2007...Lose yourself  Xbox Live ID: Marksixysix (Forza 3, Forza 4 PES 2010, COD 6/MW2, WRC 2010). PSN ID: MarkSixysix ( DiRT 3 GT5, NFS:Hot pursuit). P1 Diablo red 6 gone but not forgotten  |
|
Posted 27th Sep 2009 at 02:50
|
|
|
lilnickgti6
Junior User Location: flintshire Registered: 29 Aug 2009 Posts: 85 Status: Offline |
Post #6
i think you right sixysix its the stepper motor. was the piping |
|
Posted 27th Sep 2009 at 02:58
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2026 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy. (NEW HOST)